SuccessConsole Output

Skipping 39 KB.. Full Log
   tries += 1\n            known_error_strings_redo_update = [\n                'Size mismatch',\n                'maybe run apt update',\n                'The following packages cannot be authenticated!',\n                'Unable to locate package',\n            ]\n            rc, known_error_conditions = \\\\\n                call_apt(\n                    [command] + install_argv,\n                    known_error_strings + known_error_strings_redo_update)\n            if not known_error_conditions:\n                if rc != 0:\n                    # abort if install was unsuccessful\n                    break\n                # move on to the clean command if install was successful\n                command = 'clean'\n                continue\n\n            # known errors are always interpreted as a non-zero rc\n            if rc == 0:\n                rc = 1\n            # check if update needs to be rerun\n            if (\n                set(known_error_conditions) &\n                set(known_error_strings_redo_update)\n            ):\n                command = 'update'\n                print(\"'apt install' failed and likely requires \" +\n                      \"'apt update' to run again\")\n                # retry with update command\n                continue\n\n            print('Invocation failed due to the following known error '\n                  'conditions: ' + ', '.join(known_error_conditions))\n            if tries < max_tries:\n                sleep_time = 5\n                print(\"Reinvoke 'apt install' after sleeping %s seconds\" %\n                      sleep_time)\n                sleep(sleep_time)\n                # retry install command\n\n        if command == 'clean':\n            rc, _ = call_apt([command], [])\n            break\n\n    return rc\n\n\ndef call_apt_repeatedly(argv, known_error_strings, max_tries, offset=0):\n    command = argv[0]\n    for i in range(1, max_tries + 1):\n        if i > 1:\n            sleep_time = 5 + 2 * (i + offset)\n            print(\"Reinvoke 'apt %s' (%d/%d) after sleeping %s seconds\" %\n                  (command, i + offset, max_tries + offset, sleep_time))\n            sleep(sleep_time)\n        rc, known_error_conditions = call_apt(argv, known_error_strings)\n        if not known_error_conditions:\n            # break the loop and return the reported rc\n            break\n        # known errors are always interpreted as a non-zero rc\n        if rc == 0:\n            rc = 1\n        print('')\n        print('Invocation failed due to the following known error conditions: '\n              ', '.join(known_error_conditions))\n        print('')\n        # retry in case of failure with known error condition\n    return rc, known_error_conditions, i + offset\n\n\ndef call_apt(argv, known_error_strings):\n    known_error_conditions = []\n\n    # some of the used options are not supported in older distros\n    # e.g. Ubuntu Wily, Debian Jessie\n    cmd = ['apt-get'] + argv\n    print(\"Invoking '%s'\" % ' '.join(cmd))\n    proc = subprocess.Popen(\n        cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)\n    lines = []\n    while True:\n        line = proc.stdout.readline()\n        if not line:\n            break\n        line = line.decode()\n        lines.append(line)\n        sys.stdout.write(line)\n        for known_error_string in known_error_strings:\n            if known_error_string in line:\n                if known_error_string not in known_error_conditions:\n                    known_error_conditions.append(known_error_string)\n    proc.wait()\n    rc = proc.returncode\n    if rc and not known_error_conditions:\n        print('Invocation failed without any known error condition, '\n              'printing all lines to debug known error detection:')\n        for index, line in enumerate(lines):\n            print(' ', index + 1, \"'%s'\" % line.rstrip('\\\\n\\\\r'))\n        print('None of the following known errors were detected:')\n        for index, known_error_string in enumerate(known_error_strings):\n            print(' ', index + 1, \"'%s'\" % known_error_string)\n    return rc, known_error_conditions\n\n\nif __name__ == '__main__':\n    sys.exit(main())" > /tmp/wrapper_scripts/apt.py
10:15:52  ---> Using cache
10:15:52  ---> bd37aa039bdb
10:15:52 Step 19 : RUN echo "#!/usr/bin/env python3\n\n# Copyright 2016 Open Source Robotics Foundation, Inc.\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n#     http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\nimport subprocess\nimport sys\nfrom time import sleep\n\n\ndef main(argv=sys.argv[1:]):\n    max_tries = 10\n    known_error_strings = [\n        'Connection timed out',\n    ]\n\n    command = argv[0]\n    if command == 'clone':\n        rc, _, _ = call_git_repeatedly(\n            argv, known_error_strings, max_tries)\n        return rc\n    else:\n        assert \"Command '%s' not implemented\" % command\n\n\ndef call_git_repeatedly(argv, known_error_strings, max_tries):\n    command = argv[0]\n    for i in range(1, max_tries + 1):\n        if i > 1:\n            sleep_time = 5 + 2 * i\n            print(\"Reinvoke 'git %s' (%d/%d) after sleeping %s seconds\" %\n                  (command, i, max_tries, sleep_time))\n            sleep(sleep_time)\n        rc, known_error_conditions = call_git(argv, known_error_strings)\n        if rc == 0 or not known_error_conditions:\n            break\n        print('')\n        print('Invocation failed due to the following known error conditions: '\n              ', '.join(known_error_conditions))\n        print('')\n        # retry in case of failure with known error condition\n    return rc, known_error_conditions, i\n\n\ndef call_git(argv, known_error_strings):\n    known_error_conditions = []\n\n    cmd = ['git'] + argv\n    print(\"Invoking '%s'\" % ' '.join(cmd))\n    proc = subprocess.Popen(\n        cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)\n    while True:\n        line = proc.stdout.readline()\n        if not line:\n            break\n        line = line.decode()\n        sys.stdout.write(line)\n        for known_error_string in known_error_strings:\n            if known_error_string in line:\n                if known_error_string not in known_error_conditions:\n                    known_error_conditions.append(known_error_string)\n    proc.wait()\n    rc = proc.returncode\n    return rc, known_error_conditions\n\n\nif __name__ == '__main__':\n    sys.exit(main())" > /tmp/wrapper_scripts/git.py
10:15:54  ---> Using cache
10:15:54  ---> e94c6e509266
10:15:54 Step 20 : RUN echo "2019-10-02 (+0000)"
10:15:56  ---> Using cache
10:15:56  ---> 9f74bb29a538
10:15:56 Step 21 : RUN for i in 1 2 3; do apt-get update && apt-get install -q -y python3 && apt-get clean && break || if [[ $i < 3 ]]; then sleep 5; else false; fi; done
10:15:58  ---> Using cache
10:15:58  ---> e71a607fb7e9
10:15:58 Step 22 : RUN python3 -u /tmp/wrapper_scripts/apt.py update-install-clean -q -y devscripts dpkg-dev python3-apt python3-catkin-pkg-modules python3-empy python3-rosdistro-modules python3-yaml
10:15:59  ---> Using cache
10:15:59  ---> bb177a315dff
10:15:59 Step 23 : RUN echo "2019-10-02 09:15:22 +0000"
10:16:02  ---> Running in e35607e52035
10:16:03 2019-10-02 09:15:22 +0000
10:16:04  ---> 6f1577683a59
10:16:04 Error removing intermediate container e35607e52035: rmdriverfs: Driver aufs failed to remove root filesystem e35607e52035464738888db381ca035dac2ee16369c9284ffcbf80043232d305: rename /var/lib/docker/aufs/mnt/e35607e52035464738888db381ca035dac2ee16369c9284ffcbf80043232d305 /var/lib/docker/aufs/mnt/e35607e52035464738888db381ca035dac2ee16369c9284ffcbf80043232d305-removing: device or resource busy
10:16:04 Step 24 : RUN python3 -u /tmp/wrapper_scripts/apt.py update
10:16:04  ---> Running in 1f16025e1fce
10:16:04 Invoking 'apt-get update'
10:16:05 Get:1 http://10.210.9.154/ubuntu/building xenial InRelease [2,856 B]
10:16:05 Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
10:16:05 Hit:3 http://archive.ubuntu.com/ubuntu xenial InRelease
10:16:05 Get:4 http://archive.ubuntu.com/ubuntu xenial-updates InRelease [109 kB]
10:16:05 Hit:5 http://archive.ubuntu.com/ubuntu xenial-backports InRelease
10:16:05 Get:6 http://archive.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
10:16:05 Hit:7 http://packages.ros.org/ros/ubuntu xenial InRelease
10:16:05 Get:8 http://10.210.9.154/ubuntu/building xenial/main Sources [177 kB]
10:16:06 Fetched 507 kB in 1s (368 kB/s)
10:16:08 Reading package lists...
10:16:08 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50
10:16:08 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50
10:16:08 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52
10:16:08 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52
10:16:08 W: http://10.210.9.154/ubuntu/building/dists/xenial/InRelease: Signature by key 0379D44201EF3A91028107A8DCD74318AED39854 uses weak digest algorithm (SHA1)
10:16:08 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50
10:16:08 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50
10:16:08 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52
10:16:08 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52
10:16:09  ---> c5f3c3674143
10:16:09 Removing intermediate container 1f16025e1fce
10:16:09 Error removing intermediate container e35607e52035: nosuchcontainer: no such id: e35607e52035464738888db381ca035dac2ee16369c9284ffcbf80043232d305
10:16:09 Step 25 : USER buildfarm
10:16:09  ---> Running in 3b3c9e0b0d0a
10:16:09  ---> d87ef02679e9
10:16:09 Error removing intermediate container e35607e52035: nosuchcontainer: no such id: e35607e52035464738888db381ca035dac2ee16369c9284ffcbf80043232d305
10:16:09 Step 26 : ENTRYPOINT sh -c
10:16:09  ---> Running in 2af4282ff6c1
10:16:10  ---> f8f5341aad75
10:16:10 Error removing intermediate container e35607e52035: nosuchcontainer: no such id: e35607e52035464738888db381ca035dac2ee16369c9284ffcbf80043232d305
10:16:10 Step 27 : CMD PYTHONPATH=/tmp/ros_buildfarm:$PYTHONPATH python3 -u /tmp/ros_buildfarm/scripts/release/get_sourcedeb.py --rosdistro-index-url https://raw.githubusercontent.com/LCAS/rosdistro/master/index.yaml kinetic pedsim_scenarios --sourcedeb-dir /tmp/binarydeb && PYTHONPATH=/tmp/ros_buildfarm:$PYTHONPATH python3 -u /tmp/ros_buildfarm/scripts/release/append_build_timestamp.py kinetic pedsim_scenarios --sourcedeb-dir /tmp/binarydeb && PYTHONPATH=/tmp/ros_buildfarm:$PYTHONPATH python3 -u /tmp/ros_buildfarm/scripts/release/create_binarydeb_task_generator.py --rosdistro-index-url https://raw.githubusercontent.com/LCAS/rosdistro/master/index.yaml kinetic pedsim_scenarios ubuntu xenial amd64 --distribution-repository-urls http://10.210.9.154/ubuntu/building http://packages.ros.org/ros/ubuntu --distribution-repository-key-files /tmp/keys/0.key /tmp/keys/1.key --binarydeb-dir /tmp/binarydeb --dockerfile-dir /tmp/docker_build_binarydeb
10:16:10  ---> Running in 853c49d298a6
10:16:10  ---> 50e7c70e2c8a
10:16:10 Error removing intermediate container e35607e52035: nosuchcontainer: no such id: e35607e52035464738888db381ca035dac2ee16369c9284ffcbf80043232d305
10:16:10 Successfully built 50e7c70e2c8a
10:16:10 + echo # END SECTION
10:16:10 # END SECTION
10:16:10 + echo # BEGIN SECTION: Run Dockerfile - binarydeb task
1. Run Dockerfile - binarydeb task

Hide Details

10:16:10 # BEGIN SECTION: Run Dockerfile - binarydeb task 10:16:10 + [ -f /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/binarydeb ] 10:16:10 + rm -fr /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/binarydeb 10:16:10 + rm -fr /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/docker_build_binarydeb 10:16:10 + mkdir -p /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/binarydeb 10:16:10 + mkdir -p /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/docker_build_binarydeb 10:16:10 + docker run --rm --cidfile=/home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/docker_generating_docker/docker.cid -e=TRAVIS= -e=ROS_BUILDFARM_PULL_REQUEST_BRANCH= -v /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/ros_buildfarm:/tmp/ros_buildfarm:ro -v /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/binarydeb:/tmp/binarydeb -v /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/docker_build_binarydeb:/tmp/docker_build_binarydeb -v /home/jenkins-slave/.ccache:/home/buildfarm/.ccache binarydeb_task_generation.kinetic_ubuntu_xenial_amd64_pedsim_scenarios
1.1. get sourcedeb

Hide Details

10:16:11 # BEGIN SUBSECTION: get sourcedeb 10:16:21 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:16:21 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:16:21 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:16:21 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:16:21 Invoking '/usr/bin/python3 /tmp/ros_buildfarm/ros_buildfarm/wrapper/apt.py source --download-only --only-source ros-kinetic-pedsim-scenarios=1.0.0-1xenial' 10:16:23 Invoking 'apt-get source --download-only --only-source ros-kinetic-pedsim-scenarios=1.0.0-1xenial' 10:16:23 Reading package lists... 10:16:23 Need to get 4,903 B of source archives. 10:16:23 Get:1 http://10.210.9.154/ubuntu/building xenial/main ros-kinetic-pedsim-scenarios 1.0.0-1xenial (dsc) [1,008 B] 10:16:23 Get:2 http://10.210.9.154/ubuntu/building xenial/main ros-kinetic-pedsim-scenarios 1.0.0-1xenial (tar) [2,083 B] 10:16:23 Get:3 http://10.210.9.154/ubuntu/building xenial/main ros-kinetic-pedsim-scenarios 1.0.0-1xenial (diff) [1,812 B] 10:16:23 Fetched 4,903 B in 0s (359 kB/s) 10:16:23 Download complete and in download only mode 10:16:23 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:16:23 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:16:23 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:16:23 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:16:23 Invoking 'dpkg-source -x ros-kinetic-pedsim-scenarios_1.0.0-1xenial.dsc' 10:16:23 dpkg-source: warning: extracting unsigned source package (ros-kinetic-pedsim-scenarios_1.0.0-1xenial.dsc) 10:16:23 dpkg-source: info: extracting ros-kinetic-pedsim-scenarios in ros-kinetic-pedsim-scenarios-1.0.0 10:16:23 dpkg-source: info: unpacking ros-kinetic-pedsim-scenarios_1.0.0.orig.tar.gz 10:16:23 dpkg-source: info: unpacking ros-kinetic-pedsim-scenarios_1.0.0-1xenial.debian.tar.xz 10:16:23 Package maintainer emails: chitt@aass.oru.se 10:16:23 # END SUBSECTION
1.2. append build timestamp

Hide Details

10:16:24 # BEGIN SUBSECTION: append build timestamp 10:16:24 Invoking 'debchange -v 1.0.0-1xenial-20191002-091624+0000 -p -D xenial -u high -m Append timestamp when binarydeb was built.' in '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:16:24 # END SUBSECTION
10:16:29 Looking for the '.dsc' file of package 'ros-kinetic-pedsim-scenarios' with version '1.0.0-1' 10:16:31 Using the following distribution repositories: 10:16:31 http://10.210.9.154/ubuntu/building (/tmp/keys/0.key) 10:16:31 http://packages.ros.org/ros/ubuntu (/tmp/keys/1.key) 10:16:31 Generating Dockerfile '/tmp/docker_build_binarydeb/Dockerfile': 10:16:31 # generated from release/binarydeb_task.Dockerfile.em 10:16:31 10:16:31 10:16:31 FROM ubuntu:xenial 10:16:31 10:16:31 VOLUME ["/var/cache/apt/archives"] 10:16:31 10:16:31 ENV DEBIAN_FRONTEND noninteractive 10:16:31 10:16:31 RUN for i in 1 2 3; do apt-get update && apt-get install -q -y locales && apt-get clean && break || if [[ $i < 3 ]]; then sleep 5; else false; fi; done 10:16:31 RUN echo "en_US.UTF-8 UTF-8" >> /etc/locale.gen 10:16:31 RUN locale-gen en_US.UTF-8 10:16:31 ENV LANG en_US.UTF-8 10:16:31 ENV TZ GMT+00 10:16:31 10:16:31 RUN useradd -u 1002 -m buildfarm 10:16:31 10:16:31 10:16:31 RUN mkdir /tmp/keys 10:16:31 RUN echo "-----BEGIN PGP PUBLIC KEY BLOCK-----\nVersion: GnuPG v1.4.11 (GNU/Linux)\n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\nChb0eEZA5ePvnGofu+3JH48FmCIPveD+4kI9GhtGkCL3Q2PiPiLcSnWQWQ==\n=nFcN\n-----END PGP PUBLIC KEY BLOCK----- \n" > /tmp/keys/0.key && apt-key add /tmp/keys/0.key 10:16:31 RUN echo "-----BEGIN PGP PUBLIC KEY BLOCK-----\nVersion: SKS 1.1.6\nComment: Hostname: keyserver.ubuntu.com\n\nmQINBFzvJpYBEADY8l1YvO7iYW5gUESyzsTGnMvVUmlV3XarBaJz9bGRmgPXh7jcVFrQhE0L\n/HV7LOfoLI9H2GWYyHBqN5ERBlcA8XxG3ZvX7t9nAZPQT2Xxe3GT3trou5oCR+SyHN9xPnUw\nDuqUSvJ2eqMYb9B/Hph3OmtjG30jSNq9kOF5bBTk1hOTGPH4K/AY0jzT6OpHfXU6ytlFsI47\nZKsnTUhipGsKucQ1CXlyirndZ3V3k70YaooZ55rGaIoAWlx2H0J7sAHmqS29N9jV9mo135d+\nd+TdLBXI0PXtiHzE9IPaX+ctdSUrPnp+TwR99lxglpIG6hLuvOMAaxiqFBB/Jf3XJ8OBakfS\n6nHrWH2WqQxRbiITl0irkQozpwNEF2Bv0+Jvs1UFEdVGz5a8xexQHst/RmKrtHLct3iOCvBN\nqoAQRbvWvBhPjO/pV5cYeUljZ5wpHyFkaEViClaVWqa6PIsyLqmyjsruPCWlURLsQoQxABcL\n8bwxX7UThM6CtH6tGlYZ85RIzRifIm2oudzV5l+8oRgFr9yVcwyOFT6JCioqkwldW52P1pk/\n/SnuexC6LYqqDuHUs5NnokzzpfS6QaWfTY5P5tz4KHJfsjDIktly3mKVfY0fSPVVokdGpcUz\nvz2hq1fqjxB6MlB/1vtk0bImfcsoxBmF7H+4E9ZN1sX/tSb0KQARAQABtCZPcGVuIFJvYm90\naWNzIDxpbmZvQG9zcmZvdW5kYXRpb24ub3JnPokCVAQTAQoAPhYhBMHPbjHmut6IaLFytPQu\n1vurF8ZUBQJc7yaWAhsDBQkDwmcABQsJCAcCBhUKCQgLAgQWAgMBAh4BAheAAAoJEPQu1vur\nF8ZUkhIP/RbZY1ErvCEUy8iLJm9aSpLQnDZl5xILOxyZlzpg+Ml5bb0EkQDr92foCgcvLeAN\nKARNCaGLyNIWkuyDovPV0xZJrEy0kgBrDNb3++NmdI/+GA92pkedMXXioQvqdsxUagXAIB/s\nNGByJEhs37F05AnFvZbjUhceq3xTlvAMcrBWrgB4NwBivZY6IgLvl/CRQpVYwANShIQdbvHv\nZSxRonWhNXr6v/Wcf8rsp7g2VqJ2N2AcWT84aa9BLQ3Oe/SgrNx4QEhA1y7rc3oaqPVu5ZXO\nK+4O14JrpbEZ3Xs9YEjrcOuEDEpYktA8qqUDTdFyZrxb9S6BquUKrA6jZgT913kjJ4e7YAZo\nbC4rH0w4u0PrqDgYOkXA9Mo7L601/7ZaDJob80UcK+Z12ZSw73IgBix6DiJVfXuWkk5PM2zs\nFn6UOQXUNlZlDAOj5NC01V0fJ8P0v6GO9YOSSQx0j5UtkUbRfp/4W7uCPFvwAatWEHJhlM3s\nQNiMNStJFegr56xQu1a/cbJH7GdbseMhG/f0BaKQqXCI3ffB5y5AOLc9Hw7PYiTFQsuY1ePR\nhE+J9mejgWRZxkjAH/FlAubqXkDgterCh+sLkzGf+my2IbsMCuc+3aeNMJ5Ej/vlXefCH/Mp\nPWAHCqpQhe2DET/jRSaM53USAHNx8kw4MPUkxExgI7Sd\n=4Ofr\n-----END PGP PUBLIC KEY BLOCK-----\n" > /tmp/keys/1.key && apt-key add /tmp/keys/1.key 10:16:31 RUN echo deb http://10.210.9.154/ubuntu/building xenial main | tee -a /etc/apt/sources.list.d/buildfarm.list 10:16:31 RUN echo deb http://packages.ros.org/ros/ubuntu xenial main | tee -a /etc/apt/sources.list.d/buildfarm.list 10:16:31 10:16:31 RUN grep -q -F -e "deb http://old-releases.ubuntu.com" /etc/apt/sources.list && (echo "deb http://old-releases.ubuntu.com/ubuntu/ xenial multiverse" >> /etc/apt/sources.list && echo "deb-src http://old-releases.ubuntu.com/ubuntu/ xenial multiverse" >> /etc/apt/sources.list && echo "deb http://old-releases.ubuntu.com/ubuntu/ xenial-updates multiverse" >> /etc/apt/sources.list && echo "deb-src http://old-releases.ubuntu.com/ubuntu/ xenial-updates multiverse" >> /etc/apt/sources.list && echo "deb http://old-releases.ubuntu.com/ubuntu/ xenial-security multiverse" >> /etc/apt/sources.list && echo "deb-src http://old-releases.ubuntu.com/ubuntu/ xenial-security multiverse" >> /etc/apt/sources.list) || (echo "deb http://archive.ubuntu.com/ubuntu/ xenial multiverse" >> /etc/apt/sources.list && echo "deb-src http://archive.ubuntu.com/ubuntu/ xenial multiverse" >> /etc/apt/sources.list && echo "deb http://archive.ubuntu.com/ubuntu/ xenial-updates multiverse" >> /etc/apt/sources.list && echo "deb-src http://archive.ubuntu.com/ubuntu/ xenial-updates multiverse" >> /etc/apt/sources.list && echo "deb http://archive.ubuntu.com/ubuntu/ xenial-security multiverse" >> /etc/apt/sources.list && echo "deb-src http://archive.ubuntu.com/ubuntu/ xenial-security multiverse" >> /etc/apt/sources.list) 10:16:31 10:16:31 RUN mkdir /tmp/wrapper_scripts 10:16:31 RUN echo "#!/usr/bin/env python3\n\n# Copyright 2014-2016 Open Source Robotics Foundation, Inc.\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n# http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\nimport subprocess\nimport sys\nfrom time import sleep\n\n\ndef main(argv=sys.argv[1:]):\n max_tries = 10\n known_error_strings = [\n 'Failed to fetch',\n 'Hash Sum mismatch',\n 'Unable to locate package',\n 'is not what the server reported',\n ]\n\n command = argv[0]\n if command in ['update', 'source']:\n rc, _, _ = call_apt_repeatedly(\n argv, known_error_strings, max_tries)\n return rc\n elif command == 'update-install-clean':\n return call_apt_update_install_clean(\n argv[1:], known_error_strings, max_tries)\n else:\n assert \"Command '%s' not implemented\" % command\n\n\ndef call_apt_update_install_clean(\n install_argv, known_error_strings, max_tries):\n tries = 0\n command = 'update'\n while tries < max_tries:\n if command == 'update':\n rc, _, tries = call_apt_repeatedly(\n [command], known_error_strings, max_tries - tries,\n offset=tries)\n if rc != 0:\n # abort if update was unsuccessful even after retries\n break\n # move on to the install command if update was successful\n command = 'install'\n\n if command == 'install':\n # any call is considered a try\n tries += 1\n known_error_strings_redo_update = [\n 'Size mismatch',\n 'maybe run apt update',\n 'The following packages cannot be authenticated!',\n 'Unable to locate package',\n ]\n rc, known_error_conditions = \\\\\n call_apt(\n [command] + install_argv,\n known_error_strings + known_error_strings_redo_update)\n if not known_error_conditions:\n if rc != 0:\n # abort if install was unsuccessful\n break\n # move on to the clean command if install was successful\n command = 'clean'\n continue\n\n # known errors are always interpreted as a non-zero rc\n if rc == 0:\n rc = 1\n # check if update needs to be rerun\n if (\n set(known_error_conditions) &\n set(known_error_strings_redo_update)\n ):\n command = 'update'\n print(\"'apt install' failed and likely requires \" +\n \"'apt update' to run again\")\n # retry with update command\n continue\n\n print('Invocation failed due to the following known error '\n 'conditions: ' + ', '.join(known_error_conditions))\n if tries < max_tries:\n sleep_time = 5\n print(\"Reinvoke 'apt install' after sleeping %s seconds\" %\n sleep_time)\n sleep(sleep_time)\n # retry install command\n\n if command == 'clean':\n rc, _ = call_apt([command], [])\n break\n\n return rc\n\n\ndef call_apt_repeatedly(argv, known_error_strings, max_tries, offset=0):\n command = argv[0]\n for i in range(1, max_tries + 1):\n if i > 1:\n sleep_time = 5 + 2 * (i + offset)\n print(\"Reinvoke 'apt %s' (%d/%d) after sleeping %s seconds\" %\n (command, i + offset, max_tries + offset, sleep_time))\n sleep(sleep_time)\n rc, known_error_conditions = call_apt(argv, known_error_strings)\n if not known_error_conditions:\n # break the loop and return the reported rc\n break\n # known errors are always interpreted as a non-zero rc\n if rc == 0:\n rc = 1\n print('')\n print('Invocation failed due to the following known error conditions: '\n ', '.join(known_error_conditions))\n print('')\n # retry in case of failure with known error condition\n return rc, known_error_conditions, i + offset\n\n\ndef call_apt(argv, known_error_strings):\n known_error_conditions = []\n\n # some of the used options are not supported in older distros\n # e.g. Ubuntu Wily, Debian Jessie\n cmd = ['apt-get'] + argv\n print(\"Invoking '%s'\" % ' '.join(cmd))\n proc = subprocess.Popen(\n cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)\n lines = []\n while True:\n line = proc.stdout.readline()\n if not line:\n break\n line = line.decode()\n lines.append(line)\n sys.stdout.write(line)\n for known_error_string in known_error_strings:\n if known_error_string in line:\n if known_error_string not in known_error_conditions:\n known_error_conditions.append(known_error_string)\n proc.wait()\n rc = proc.returncode\n if rc and not known_error_conditions:\n print('Invocation failed without any known error condition, '\n 'printing all lines to debug known error detection:')\n for index, line in enumerate(lines):\n print(' ', index + 1, \"'%s'\" % line.rstrip('\\\\n\\\\r'))\n print('None of the following known errors were detected:')\n for index, known_error_string in enumerate(known_error_strings):\n print(' ', index + 1, \"'%s'\" % known_error_string)\n return rc, known_error_conditions\n\n\nif __name__ == '__main__':\n sys.exit(main())" > /tmp/wrapper_scripts/apt.py 10:16:31 RUN echo "#!/usr/bin/env python3\n\n# Copyright 2016 Open Source Robotics Foundation, Inc.\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n# http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\nimport subprocess\nimport sys\nfrom time import sleep\n\n\ndef main(argv=sys.argv[1:]):\n max_tries = 10\n known_error_strings = [\n 'Connection timed out',\n ]\n\n command = argv[0]\n if command == 'clone':\n rc, _, _ = call_git_repeatedly(\n argv, known_error_strings, max_tries)\n return rc\n else:\n assert \"Command '%s' not implemented\" % command\n\n\ndef call_git_repeatedly(argv, known_error_strings, max_tries):\n command = argv[0]\n for i in range(1, max_tries + 1):\n if i > 1:\n sleep_time = 5 + 2 * i\n print(\"Reinvoke 'git %s' (%d/%d) after sleeping %s seconds\" %\n (command, i, max_tries, sleep_time))\n sleep(sleep_time)\n rc, known_error_conditions = call_git(argv, known_error_strings)\n if rc == 0 or not known_error_conditions:\n break\n print('')\n print('Invocation failed due to the following known error conditions: '\n ', '.join(known_error_conditions))\n print('')\n # retry in case of failure with known error condition\n return rc, known_error_conditions, i\n\n\ndef call_git(argv, known_error_strings):\n known_error_conditions = []\n\n cmd = ['git'] + argv\n print(\"Invoking '%s'\" % ' '.join(cmd))\n proc = subprocess.Popen(\n cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)\n while True:\n line = proc.stdout.readline()\n if not line:\n break\n line = line.decode()\n sys.stdout.write(line)\n for known_error_string in known_error_strings:\n if known_error_string in line:\n if known_error_string not in known_error_conditions:\n known_error_conditions.append(known_error_string)\n proc.wait()\n rc = proc.returncode\n return rc, known_error_conditions\n\n\nif __name__ == '__main__':\n sys.exit(main())" > /tmp/wrapper_scripts/git.py 10:16:31 10:16:31 # automatic invalidation once every day 10:16:31 RUN echo "2019-10-02 (+0000)" 10:16:31 10:16:31 RUN for i in 1 2 3; do apt-get update && apt-get install -q -y python3 && apt-get clean && break || if [[ $i < 3 ]]; then sleep 5; else false; fi; done 10:16:31 10:16:31 RUN python3 -u /tmp/wrapper_scripts/apt.py update-install-clean -q -y ccache gcc build-essential 10:16:31 10:16:31 # for each dependency: echo version, apt update, apt install, apt clean 10:16:31 RUN echo "apt-src: 0.25.1-0.2" && python3 -u /tmp/wrapper_scripts/apt.py update-install-clean -q -y -o Debug::pkgProblemResolver=yes apt-src 10:16:31 RUN echo "debhelper: 10.2.2ubuntu1~ubuntu16.04.1" && python3 -u /tmp/wrapper_scripts/apt.py update-install-clean -q -y -o Debug::pkgProblemResolver=yes debhelper 10:16:31 RUN echo "ros-kinetic-catkin: 0.7.18-1xenial-20190607-163525-0800" && python3 -u /tmp/wrapper_scripts/apt.py update-install-clean -q -y -o Debug::pkgProblemResolver=yes ros-kinetic-catkin 10:16:31 10:16:31 USER buildfarm 10:16:31 ENTRYPOINT ["sh", "-c"] 10:16:31 CMD ["PYTHONPATH=/tmp/ros_buildfarm:$PYTHONPATH PATH=/usr/lib/ccache:$PATH python3 -u /tmp/ros_buildfarm/scripts/release/build_binarydeb.py kinetic pedsim_scenarios --sourcedeb-dir /tmp/binarydeb"] 10:16:31 Mount the following volumes when running the container: 10:16:31 -v /tmp/ros_buildfarm:/tmp/ros_buildfarm:ro 10:16:31 -v /tmp/binarydeb:/tmp/binarydeb 10:16:32 + echo # END SECTION 10:16:32 # END SECTION
10:16:32 [Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary] $ /bin/sh -xe /tmp/hudson7255012141023625379.sh 10:16:32 + sleep 1 10:16:32 + python3 -u /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/ros_buildfarm/scripts/subprocess_reaper.py 14763 --cid-file /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/docker_build_binarydeb/docker.cid 10:16:33 + echo # BEGIN SECTION: Build Dockerfile - build binarydeb
2. Build Dockerfile - build binarydeb

Hide Details

10:16:33 # BEGIN SECTION: Build Dockerfile - build binarydeb 10:16:33 + cd /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/docker_build_binarydeb 10:16:33 + python3 -u /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/ros_buildfarm/scripts/misc/docker_pull_baseimage.py 10:16:34 Get base image name from Dockerfile 'Dockerfile': ubuntu:xenial 10:16:34 Check docker base image for updates: docker pull ubuntu:xenial 10:16:50 xenial: Pulling from library/ubuntu 10:16:50 Digest: sha256:3391caa63e4cb3b0310bcf426079c9b69f28871e987bde3c4a0c91af99a2ce37 10:16:50 Status: Image is up to date for ubuntu:xenial 10:16:50 + docker build --force-rm -t binarydeb_build.kinetic_ubuntu_xenial_amd64_pedsim_scenarios . 10:16:50 Sending build context to Docker daemon 18.43 kB Sending build context to Docker daemon 18.43 kB 10:16:50 Step 1 : FROM ubuntu:xenial 10:16:50 ---> ee2e0ceec801 10:16:50 Step 2 : VOLUME /var/cache/apt/archives 10:16:52 ---> Using cache 10:16:52 ---> 314b3249486c 10:16:52 Step 3 : ENV DEBIAN_FRONTEND noninteractive 10:16:53 ---> Using cache 10:16:53 ---> 043277d03f40 10:16:53 Step 4 : RUN for i in 1 2 3; do apt-get update && apt-get install -q -y locales && apt-get clean && break || if [[ $i < 3 ]]; then sleep 5; else false; fi; done 10:16:54 ---> Using cache 10:16:54 ---> e6bd7a4c4f22 10:16:54 Step 5 : RUN echo "en_US.UTF-8 UTF-8" >> /etc/locale.gen 10:16:56 ---> Using cache 10:16:56 ---> b0dab1c0d5ac 10:16:56 Step 6 : RUN locale-gen en_US.UTF-8 10:16:57 ---> Using cache 10:16:57 ---> 5e9d40102a74 10:16:57 Step 7 : ENV LANG en_US.UTF-8 10:17:00 ---> Using cache 10:17:00 ---> 564d895b66e8 10:17:00 Step 8 : ENV TZ GMT+00 10:17:02 ---> Using cache 10:17:02 ---> 8b983c6fc7cf 10:17:02 Step 9 : RUN useradd -u 1002 -m buildfarm 10:17:04 ---> Using cache 10:17:04 ---> 7fc8cc31c0d6 10:17:04 Step 10 : RUN mkdir /tmp/keys 10:17:06 ---> Using cache 10:17:06 ---> dc1628a8ed4f 10:17:06 Step 11 : RUN echo "-----BEGIN PGP PUBLIC KEY BLOCK-----\nVersion: GnuPG v1.4.11 (GNU/Linux)\n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\nChb0eEZA5ePvnGofu+3JH48FmCIPveD+4kI9GhtGkCL3Q2PiPiLcSnWQWQ==\n=nFcN\n-----END PGP PUBLIC KEY BLOCK----- \n" > /tmp/keys/0.key && apt-key add /tmp/keys/0.key 10:17:07 ---> Using cache 10:17:07 ---> d5449a1083f6 10:17:07 Step 12 : RUN echo "-----BEGIN PGP PUBLIC KEY BLOCK-----\nVersion: SKS 1.1.6\nComment: Hostname: keyserver.ubuntu.com\n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\nPWAHCqpQhe2DET/jRSaM53USAHNx8kw4MPUkxExgI7Sd\n=4Ofr\n-----END PGP PUBLIC KEY BLOCK-----\n" > /tmp/keys/1.key && apt-key add /tmp/keys/1.key 10:17:08 ---> Using cache 10:17:08 ---> 1ca39a3ea351 10:17:08 Step 13 : RUN echo deb http://10.210.9.154/ubuntu/building xenial main | tee -a /etc/apt/sources.list.d/buildfarm.list 10:17:09 ---> Using cache 10:17:09 ---> b5b742663139 10:17:09 Step 14 : RUN echo deb http://packages.ros.org/ros/ubuntu xenial main | tee -a /etc/apt/sources.list.d/buildfarm.list 10:17:10 ---> Using cache 10:17:10 ---> 8d6de5cf7a23 10:17:10 Step 15 : RUN grep -q -F -e "deb http://old-releases.ubuntu.com" /etc/apt/sources.list && (echo "deb http://old-releases.ubuntu.com/ubuntu/ xenial multiverse" >> /etc/apt/sources.list && echo "deb-src http://old-releases.ubuntu.com/ubuntu/ xenial multiverse" >> /etc/apt/sources.list && echo "deb http://old-releases.ubuntu.com/ubuntu/ xenial-updates multiverse" >> /etc/apt/sources.list && echo "deb-src http://old-releases.ubuntu.com/ubuntu/ xenial-updates multiverse" >> /etc/apt/sources.list && echo "deb http://old-releases.ubuntu.com/ubuntu/ xenial-security multiverse" >> /etc/apt/sources.list && echo "deb-src http://old-releases.ubuntu.com/ubuntu/ xenial-security multiverse" >> /etc/apt/sources.list) || (echo "deb http://archive.ubuntu.com/ubuntu/ xenial multiverse" >> /etc/apt/sources.list && echo "deb-src http://archive.ubuntu.com/ubuntu/ xenial multiverse" >> /etc/apt/sources.list && echo "deb http://archive.ubuntu.com/ubuntu/ xenial-updates multiverse" >> /etc/apt/sources.list && echo "deb-src http://archive.ubuntu.com/ubuntu/ xenial-updates multiverse" >> /etc/apt/sources.list && echo "deb http://archive.ubuntu.com/ubuntu/ xenial-security multiverse" >> /etc/apt/sources.list && echo "deb-src http://archive.ubuntu.com/ubuntu/ xenial-security multiverse" >> /etc/apt/sources.list) 10:17:10 ---> Using cache 10:17:10 ---> 241424d8a573 10:17:10 Step 16 : RUN mkdir /tmp/wrapper_scripts 10:17:11 ---> Using cache 10:17:11 ---> fdd1dd1a281b 10:17:11 Step 17 : RUN echo "#!/usr/bin/env python3\n\n# Copyright 2014-2016 Open Source Robotics Foundation, Inc.\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n# http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\nimport subprocess\nimport sys\nfrom time import sleep\n\n\ndef main(argv=sys.argv[1:]):\n max_tries = 10\n known_error_strings = [\n 'Failed to fetch',\n 'Hash Sum mismatch',\n 'Unable to locate package',\n 'is not what the server reported',\n ]\n\n command = argv[0]\n if command in ['update', 'source']:\n rc, _, _ = call_apt_repeatedly(\n argv, known_error_strings, max_tries)\n return rc\n elif command == 'update-install-clean':\n return call_apt_update_install_clean(\n argv[1:], known_error_strings, max_tries)\n else:\n assert \"Command '%s' not implemented\" % command\n\n\ndef call_apt_update_install_clean(\n install_argv, known_error_strings, max_tries):\n tries = 0\n command = 'update'\n while tries < max_tries:\n if command == 'update':\n rc, _, tries = call_apt_repeatedly(\n [command], known_error_strings, max_tries - tries,\n offset=tries)\n if rc != 0:\n # abort if update was unsuccessful even after retries\n break\n # move on to the install command if update was successful\n command = 'install'\n\n if command == 'install':\n # any call is considered a try\n tries += 1\n known_error_strings_redo_update = [\n 'Size mismatch',\n 'maybe run apt update',\n 'The following packages cannot be authenticated!',\n 'Unable to locate package',\n ]\n rc, known_error_conditions = \\\\\n call_apt(\n [command] + install_argv,\n known_error_strings + known_error_strings_redo_update)\n if not known_error_conditions:\n if rc != 0:\n # abort if install was unsuccessful\n break\n # move on to the clean command if install was successful\n command = 'clean'\n continue\n\n # known errors are always interpreted as a non-zero rc\n if rc == 0:\n rc = 1\n # check if update needs to be rerun\n if (\n set(known_error_conditions) &\n set(known_error_strings_redo_update)\n ):\n command = 'update'\n print(\"'apt install' failed and likely requires \" +\n \"'apt update' to run again\")\n # retry with update command\n continue\n\n print('Invocation failed due to the following known error '\n 'conditions: ' + ', '.join(known_error_conditions))\n if tries < max_tries:\n sleep_time = 5\n print(\"Reinvoke 'apt install' after sleeping %s seconds\" %\n sleep_time)\n sleep(sleep_time)\n # retry install command\n\n if command == 'clean':\n rc, _ = call_apt([command], [])\n break\n\n return rc\n\n\ndef call_apt_repeatedly(argv, known_error_strings, max_tries, offset=0):\n command = argv[0]\n for i in range(1, max_tries + 1):\n if i > 1:\n sleep_time = 5 + 2 * (i + offset)\n print(\"Reinvoke 'apt %s' (%d/%d) after sleeping %s seconds\" %\n (command, i + offset, max_tries + offset, sleep_time))\n sleep(sleep_time)\n rc, known_error_conditions = call_apt(argv, known_error_strings)\n if not known_error_conditions:\n # break the loop and return the reported rc\n break\n # known errors are always interpreted as a non-zero rc\n if rc == 0:\n rc = 1\n print('')\n print('Invocation failed due to the following known error conditions: '\n ', '.join(known_error_conditions))\n print('')\n # retry in case of failure with known error condition\n return rc, known_error_conditions, i + offset\n\n\ndef call_apt(argv, known_error_strings):\n known_error_conditions = []\n\n # some of the used options are not supported in older distros\n # e.g. Ubuntu Wily, Debian Jessie\n cmd = ['apt-get'] + argv\n print(\"Invoking '%s'\" % ' '.join(cmd))\n proc = subprocess.Popen(\n cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)\n lines = []\n while True:\n line = proc.stdout.readline()\n if not line:\n break\n line = line.decode()\n lines.append(line)\n sys.stdout.write(line)\n for known_error_string in known_error_strings:\n if known_error_string in line:\n if known_error_string not in known_error_conditions:\n known_error_conditions.append(known_error_string)\n proc.wait()\n rc = proc.returncode\n if rc and not known_error_conditions:\n print('Invocation failed without any known error condition, '\n 'printing all lines to debug known error detection:')\n for index, line in enumerate(lines):\n print(' ', index + 1, \"'%s'\" % line.rstrip('\\\\n\\\\r'))\n print('None of the following known errors were detected:')\n for index, known_error_string in enumerate(known_error_strings):\n print(' ', index + 1, \"'%s'\" % known_error_string)\n return rc, known_error_conditions\n\n\nif __name__ == '__main__':\n sys.exit(main())" > /tmp/wrapper_scripts/apt.py 10:17:12 ---> Using cache 10:17:12 ---> e45b40176fa2 10:17:12 Step 18 : RUN echo "#!/usr/bin/env python3\n\n# Copyright 2016 Open Source Robotics Foundation, Inc.\n#\n# Licensed under the Apache License, Version 2.0 (the \"License\");\n# you may not use this file except in compliance with the License.\n# You may obtain a copy of the License at\n#\n# http://www.apache.org/licenses/LICENSE-2.0\n#\n# Unless required by applicable law or agreed to in writing, software\n# distributed under the License is distributed on an \"AS IS\" BASIS,\n# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n# See the License for the specific language governing permissions and\n# limitations under the License.\n\nimport subprocess\nimport sys\nfrom time import sleep\n\n\ndef main(argv=sys.argv[1:]):\n max_tries = 10\n known_error_strings = [\n 'Connection timed out',\n ]\n\n command = argv[0]\n if command == 'clone':\n rc, _, _ = call_git_repeatedly(\n argv, known_error_strings, max_tries)\n return rc\n else:\n assert \"Command '%s' not implemented\" % command\n\n\ndef call_git_repeatedly(argv, known_error_strings, max_tries):\n command = argv[0]\n for i in range(1, max_tries + 1):\n if i > 1:\n sleep_time = 5 + 2 * i\n print(\"Reinvoke 'git %s' (%d/%d) after sleeping %s seconds\" %\n (command, i, max_tries, sleep_time))\n sleep(sleep_time)\n rc, known_error_conditions = call_git(argv, known_error_strings)\n if rc == 0 or not known_error_conditions:\n break\n print('')\n print('Invocation failed due to the following known error conditions: '\n ', '.join(known_error_conditions))\n print('')\n # retry in case of failure with known error condition\n return rc, known_error_conditions, i\n\n\ndef call_git(argv, known_error_strings):\n known_error_conditions = []\n\n cmd = ['git'] + argv\n print(\"Invoking '%s'\" % ' '.join(cmd))\n proc = subprocess.Popen(\n cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)\n while True:\n line = proc.stdout.readline()\n if not line:\n break\n line = line.decode()\n sys.stdout.write(line)\n for known_error_string in known_error_strings:\n if known_error_string in line:\n if known_error_string not in known_error_conditions:\n known_error_conditions.append(known_error_string)\n proc.wait()\n rc = proc.returncode\n return rc, known_error_conditions\n\n\nif __name__ == '__main__':\n sys.exit(main())" > /tmp/wrapper_scripts/git.py 10:17:13 ---> Using cache 10:17:13 ---> 3d4ea9b7fc66 10:17:13 Step 19 : RUN echo "2019-10-02 (+0000)" 10:17:14 ---> Using cache 10:17:14 ---> 0a9efb4d29a5 10:17:14 Step 20 : RUN for i in 1 2 3; do apt-get update && apt-get install -q -y python3 && apt-get clean && break || if [[ $i < 3 ]]; then sleep 5; else false; fi; done 10:17:15 ---> Using cache 10:17:15 ---> d7b811a2e96c 10:17:15 Step 21 : RUN python3 -u /tmp/wrapper_scripts/apt.py update-install-clean -q -y ccache gcc build-essential 10:17:15 ---> Running in 682b963099e3 10:17:16 Invoking 'apt-get update' 10:17:16 Get:1 http://10.210.9.154/ubuntu/building xenial InRelease [2,856 B] 10:17:16 Hit:2 http://security.ubuntu.com/ubuntu xenial-security InRelease 10:17:16 Hit:3 http://archive.ubuntu.com/ubuntu xenial InRelease 10:17:16 Hit:4 http://archive.ubuntu.com/ubuntu xenial-updates InRelease 10:17:16 Hit:5 http://archive.ubuntu.com/ubuntu xenial-backports InRelease 10:17:16 Hit:6 http://archive.ubuntu.com/ubuntu xenial-security InRelease 10:17:16 Hit:7 http://packages.ros.org/ros/ubuntu xenial InRelease 10:17:18 Fetched 2,856 B in 1s (1,770 B/s) 10:17:20 Reading package lists... 10:17:20 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:17:20 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:17:20 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:17:20 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:17:20 W: http://10.210.9.154/ubuntu/building/dists/xenial/InRelease: Signature by key 0379D44201EF3A91028107A8DCD74318AED39854 uses weak digest algorithm (SHA1) 10:17:20 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:17:20 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:17:20 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:17:20 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:17:20 Invoking 'apt-get install -q -y ccache gcc build-essential' 10:17:21 Reading package lists... 10:17:21 Building dependency tree... 10:17:21 Reading state information... 10:17:22 The following additional packages will be installed: 10:17:22 binutils bzip2 cpp cpp-5 dpkg-dev fakeroot g++ g++-5 gcc-5 ifupdown iproute2 10:17:22 isc-dhcp-client isc-dhcp-common libalgorithm-diff-perl 10:17:22 libalgorithm-diff-xs-perl libalgorithm-merge-perl libasan2 libatm1 10:17:22 libatomic1 libc-dev-bin libc6-dev libcc1-0 libcilkrts5 libdns-export162 10:17:22 libdpkg-perl libfakeroot libfile-fcntllock-perl libgcc-5-dev libgdbm3 10:17:22 libgmp10 libgomp1 libisc-export160 libisl15 libitm1 liblsan0 libmnl0 libmpc3 10:17:22 libmpfr4 libmpx0 libperl5.22 libquadmath0 libstdc++-5-dev libtsan0 libubsan0 10:17:22 libxtables11 linux-libc-dev make manpages manpages-dev netbase patch perl 10:17:22 perl-modules-5.22 rename xz-utils 10:17:22 Suggested packages: 10:17:22 binutils-doc bzip2-doc distcc cpp-doc gcc-5-locales debian-keyring 10:17:22 g++-multilib g++-5-multilib gcc-5-doc libstdc++6-5-dbg gcc-multilib autoconf 10:17:22 automake libtool flex bison gdb gcc-doc gcc-5-multilib libgcc1-dbg 10:17:22 libgomp1-dbg libitm1-dbg libatomic1-dbg libasan2-dbg liblsan0-dbg 10:17:22 libtsan0-dbg libubsan0-dbg libcilkrts5-dbg libmpx0-dbg libquadmath0-dbg ppp 10:17:22 rdnssd iproute2-doc resolvconf avahi-autoipd isc-dhcp-client-ddns apparmor 10:17:22 glibc-doc libstdc++-5-doc make-doc man-browser ed diffutils-doc perl-doc 10:17:22 libterm-readline-gnu-perl | libterm-readline-perl-perl 10:17:22 The following NEW packages will be installed: 10:17:22 binutils build-essential bzip2 ccache cpp cpp-5 dpkg-dev fakeroot g++ g++-5 10:17:22 gcc gcc-5 ifupdown iproute2 isc-dhcp-client isc-dhcp-common 10:17:22 libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl 10:17:22 libasan2 libatm1 libatomic1 libc-dev-bin libc6-dev libcc1-0 libcilkrts5 10:17:22 libdns-export162 libdpkg-perl libfakeroot libfile-fcntllock-perl 10:17:22 libgcc-5-dev libgdbm3 libgmp10 libgomp1 libisc-export160 libisl15 libitm1 10:17:22 liblsan0 libmnl0 libmpc3 libmpfr4 libmpx0 libperl5.22 libquadmath0 10:17:22 libstdc++-5-dev libtsan0 libubsan0 libxtables11 linux-libc-dev make manpages 10:17:22 manpages-dev netbase patch perl perl-modules-5.22 rename xz-utils 10:17:22 0 upgraded, 58 newly installed, 0 to remove and 4 not upgraded. 10:17:22 Need to get 48.0 MB of archives. 10:17:22 After this operation, 192 MB of additional disk space will be used. 10:17:22 Get:1 http://archive.ubuntu.com/ubuntu xenial/main amd64 libatm1 amd64 1:2.5.1-1.5 [24.2 kB] 10:17:22 Get:2 http://archive.ubuntu.com/ubuntu xenial/main amd64 libmnl0 amd64 1.0.3-5 [12.0 kB] 10:17:22 Get:3 http://archive.ubuntu.com/ubuntu xenial/main amd64 libgdbm3 amd64 1.8.3-13.1 [16.9 kB] 10:17:22 Get:4 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 perl-modules-5.22 all 5.22.1-9ubuntu0.6 [2,629 kB] 10:17:22 Get:5 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libperl5.22 amd64 5.22.1-9ubuntu0.6 [3,405 kB] 10:17:22 Get:6 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 perl amd64 5.22.1-9ubuntu0.6 [237 kB] 10:17:22 Get:7 http://archive.ubuntu.com/ubuntu xenial/main amd64 libgmp10 amd64 2:6.1.0+dfsg-2 [240 kB] 10:17:22 Get:8 http://archive.ubuntu.com/ubuntu xenial/main amd64 libmpfr4 amd64 3.1.4-1 [191 kB] 10:17:22 Get:9 http://archive.ubuntu.com/ubuntu xenial/main amd64 libmpc3 amd64 1.0.3-1 [39.7 kB] 10:17:22 Get:10 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 bzip2 amd64 1.0.6-8ubuntu0.2 [32.5 kB] 10:17:22 Get:11 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 iproute2 amd64 4.3.0-1ubuntu3.16.04.5 [523 kB] 10:17:22 Get:12 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 ifupdown amd64 0.8.10ubuntu1.4 [54.9 kB] 10:17:22 Get:13 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libisc-export160 amd64 1:9.10.3.dfsg.P4-8ubuntu1.15 [153 kB] 10:17:23 Get:14 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libdns-export162 amd64 1:9.10.3.dfsg.P4-8ubuntu1.15 [665 kB] 10:17:23 Get:15 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 isc-dhcp-client amd64 4.3.3-5ubuntu12.10 [224 kB] 10:17:23 Get:16 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 isc-dhcp-common amd64 4.3.3-5ubuntu12.10 [105 kB] 10:17:23 Get:17 http://archive.ubuntu.com/ubuntu xenial/main amd64 libxtables11 amd64 1.6.0-2ubuntu3 [27.2 kB] 10:17:23 Get:18 http://archive.ubuntu.com/ubuntu xenial/main amd64 netbase all 5.3 [12.9 kB] 10:17:23 Get:19 http://archive.ubuntu.com/ubuntu xenial/main amd64 manpages all 4.04-2 [1,087 kB] 10:17:23 Get:20 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 binutils amd64 2.26.1-1ubuntu1~16.04.8 [2,312 kB] 10:17:23 Get:21 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libc-dev-bin amd64 2.23-0ubuntu11 [68.5 kB] 10:17:23 Get:22 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 linux-libc-dev amd64 4.4.0-165.193 [838 kB] 10:17:23 Get:23 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libc6-dev amd64 2.23-0ubuntu11 [2,086 kB] 10:17:23 Get:24 http://archive.ubuntu.com/ubuntu xenial/main amd64 libisl15 amd64 0.16.1-1 [524 kB] 10:17:24 Get:25 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 cpp-5 amd64 5.4.0-6ubuntu1~16.04.11 [7,660 kB] 10:17:24 Get:26 http://archive.ubuntu.com/ubuntu xenial/main amd64 cpp amd64 4:5.3.1-1ubuntu1 [27.7 kB] 10:17:24 Get:27 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libcc1-0 amd64 5.4.0-6ubuntu1~16.04.11 [38.8 kB] 10:17:24 Get:28 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libgomp1 amd64 5.4.0-6ubuntu1~16.04.11 [55.0 kB] 10:17:24 Get:29 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libitm1 amd64 5.4.0-6ubuntu1~16.04.11 [27.4 kB] 10:17:24 Get:30 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libatomic1 amd64 5.4.0-6ubuntu1~16.04.11 [8,896 B] 10:17:24 Get:31 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libasan2 amd64 5.4.0-6ubuntu1~16.04.11 [264 kB] 10:17:24 Get:32 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 liblsan0 amd64 5.4.0-6ubuntu1~16.04.11 [105 kB] 10:17:25 Get:33 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libtsan0 amd64 5.4.0-6ubuntu1~16.04.11 [244 kB] 10:17:25 Get:34 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libubsan0 amd64 5.4.0-6ubuntu1~16.04.11 [95.4 kB] 10:17:25 Get:35 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libcilkrts5 amd64 5.4.0-6ubuntu1~16.04.11 [40.1 kB] 10:17:25 Get:36 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libmpx0 amd64 5.4.0-6ubuntu1~16.04.11 [9,748 B] 10:17:25 Get:37 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libquadmath0 amd64 5.4.0-6ubuntu1~16.04.11 [131 kB] 10:17:25 Get:38 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libgcc-5-dev amd64 5.4.0-6ubuntu1~16.04.11 [2,229 kB] 10:17:25 Get:39 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 gcc-5 amd64 5.4.0-6ubuntu1~16.04.11 [8,417 kB] 10:17:25 Get:40 http://archive.ubuntu.com/ubuntu xenial/main amd64 gcc amd64 4:5.3.1-1ubuntu1 [5,244 B] 10:17:25 Get:41 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libstdc++-5-dev amd64 5.4.0-6ubuntu1~16.04.11 [1,426 kB] 10:17:25 Get:42 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 g++-5 amd64 5.4.0-6ubuntu1~16.04.11 [8,310 kB] 10:17:26 Get:43 http://archive.ubuntu.com/ubuntu xenial/main amd64 g++ amd64 4:5.3.1-1ubuntu1 [1,504 B] 10:17:26 Get:44 http://archive.ubuntu.com/ubuntu xenial/main amd64 make amd64 4.1-6 [151 kB] 10:17:26 Get:45 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libdpkg-perl all 1.18.4ubuntu1.6 [195 kB] 10:17:26 Get:46 http://archive.ubuntu.com/ubuntu xenial/main amd64 xz-utils amd64 5.1.1alpha+20120614-2ubuntu2 [78.8 kB] 10:17:26 Get:47 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 patch amd64 2.7.5-1ubuntu0.16.04.2 [90.8 kB] 10:17:26 Get:48 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 dpkg-dev all 1.18.4ubuntu1.6 [584 kB] 10:17:26 Get:49 http://archive.ubuntu.com/ubuntu xenial/main amd64 build-essential amd64 12.1ubuntu2 [4,758 B] 10:17:26 Get:50 http://archive.ubuntu.com/ubuntu xenial/main amd64 ccache amd64 3.2.4-1 [83.7 kB] 10:17:26 Get:51 http://archive.ubuntu.com/ubuntu xenial/main amd64 libfakeroot amd64 1.20.2-1ubuntu1 [25.5 kB] 10:17:26 Get:52 http://archive.ubuntu.com/ubuntu xenial/main amd64 fakeroot amd64 1.20.2-1ubuntu1 [61.8 kB] 10:17:26 Get:53 http://archive.ubuntu.com/ubuntu xenial/main amd64 libalgorithm-diff-perl all 1.19.03-1 [47.6 kB] 10:17:26 Get:54 http://archive.ubuntu.com/ubuntu xenial/main amd64 libalgorithm-diff-xs-perl amd64 0.04-4build1 [11.0 kB] 10:17:26 Get:55 http://archive.ubuntu.com/ubuntu xenial/main amd64 libalgorithm-merge-perl all 0.08-3 [12.0 kB] 10:17:26 Get:56 http://archive.ubuntu.com/ubuntu xenial/main amd64 libfile-fcntllock-perl amd64 0.22-3 [32.0 kB] 10:17:26 Get:57 http://archive.ubuntu.com/ubuntu xenial/main amd64 manpages-dev all 4.04-2 [2,048 kB] 10:17:27 Get:58 http://archive.ubuntu.com/ubuntu xenial/main amd64 rename all 0.20-4 [12.0 kB] 10:17:27 debconf: delaying package configuration, since apt-utils is not installed 10:17:27 Fetched 48.0 MB in 4s (9,794 kB/s) 10:17:28 Selecting previously unselected package libatm1:amd64. 10:17:28 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 6393 files and directories currently installed.) 10:17:28 Preparing to unpack .../libatm1_1%3a2.5.1-1.5_amd64.deb ... 10:17:28 Unpacking libatm1:amd64 (1:2.5.1-1.5) ... 10:17:28 Selecting previously unselected package libmnl0:amd64. 10:17:28 Preparing to unpack .../libmnl0_1.0.3-5_amd64.deb ... 10:17:28 Unpacking libmnl0:amd64 (1.0.3-5) ... 10:17:28 Selecting previously unselected package libgdbm3:amd64. 10:17:28 Preparing to unpack .../libgdbm3_1.8.3-13.1_amd64.deb ... 10:17:28 Unpacking libgdbm3:amd64 (1.8.3-13.1) ... 10:17:28 Selecting previously unselected package perl-modules-5.22. 10:17:28 Preparing to unpack .../perl-modules-5.22_5.22.1-9ubuntu0.6_all.deb ... 10:17:28 Unpacking perl-modules-5.22 (5.22.1-9ubuntu0.6) ... 10:17:29 Selecting previously unselected package libperl5.22:amd64. 10:17:29 Preparing to unpack .../libperl5.22_5.22.1-9ubuntu0.6_amd64.deb ... 10:17:29 Unpacking libperl5.22:amd64 (5.22.1-9ubuntu0.6) ... 10:17:34 Selecting previously unselected package perl. 10:17:34 Preparing to unpack .../perl_5.22.1-9ubuntu0.6_amd64.deb ... 10:17:34 Unpacking perl (5.22.1-9ubuntu0.6) ... 10:17:36 Selecting previously unselected package libgmp10:amd64. 10:17:36 Preparing to unpack .../libgmp10_2%3a6.1.0+dfsg-2_amd64.deb ... 10:17:36 Unpacking libgmp10:amd64 (2:6.1.0+dfsg-2) ... 10:17:36 Selecting previously unselected package libmpfr4:amd64. 10:17:36 Preparing to unpack .../libmpfr4_3.1.4-1_amd64.deb ... 10:17:36 Unpacking libmpfr4:amd64 (3.1.4-1) ... 10:17:36 Selecting previously unselected package libmpc3:amd64. 10:17:36 Preparing to unpack .../libmpc3_1.0.3-1_amd64.deb ... 10:17:36 Unpacking libmpc3:amd64 (1.0.3-1) ... 10:17:37 Selecting previously unselected package bzip2. 10:17:37 Preparing to unpack .../bzip2_1.0.6-8ubuntu0.2_amd64.deb ... 10:17:37 Unpacking bzip2 (1.0.6-8ubuntu0.2) ... 10:17:37 Selecting previously unselected package iproute2. 10:17:37 Preparing to unpack .../iproute2_4.3.0-1ubuntu3.16.04.5_amd64.deb ... 10:17:37 Unpacking iproute2 (4.3.0-1ubuntu3.16.04.5) ... 10:17:37 Selecting previously unselected package ifupdown. 10:17:37 Preparing to unpack .../ifupdown_0.8.10ubuntu1.4_amd64.deb ... 10:17:37 Unpacking ifupdown (0.8.10ubuntu1.4) ... 10:17:37 Selecting previously unselected package libisc-export160. 10:17:37 Preparing to unpack .../libisc-export160_1%3a9.10.3.dfsg.P4-8ubuntu1.15_amd64.deb ... 10:17:37 Unpacking libisc-export160 (1:9.10.3.dfsg.P4-8ubuntu1.15) ... 10:17:37 Selecting previously unselected package libdns-export162. 10:17:37 Preparing to unpack .../libdns-export162_1%3a9.10.3.dfsg.P4-8ubuntu1.15_amd64.deb ... 10:17:37 Unpacking libdns-export162 (1:9.10.3.dfsg.P4-8ubuntu1.15) ... 10:17:38 Selecting previously unselected package isc-dhcp-client. 10:17:38 Preparing to unpack .../isc-dhcp-client_4.3.3-5ubuntu12.10_amd64.deb ... 10:17:38 Unpacking isc-dhcp-client (4.3.3-5ubuntu12.10) ... 10:17:38 Selecting previously unselected package isc-dhcp-common. 10:17:38 Preparing to unpack .../isc-dhcp-common_4.3.3-5ubuntu12.10_amd64.deb ... 10:17:38 Unpacking isc-dhcp-common (4.3.3-5ubuntu12.10) ... 10:17:38 Selecting previously unselected package libxtables11:amd64. 10:17:38 Preparing to unpack .../libxtables11_1.6.0-2ubuntu3_amd64.deb ... 10:17:38 Unpacking libxtables11:amd64 (1.6.0-2ubuntu3) ... 10:17:38 Selecting previously unselected package netbase. 10:17:38 Preparing to unpack .../archives/netbase_5.3_all.deb ... 10:17:38 Unpacking netbase (5.3) ... 10:17:38 Selecting previously unselected package manpages. 10:17:38 Preparing to unpack .../manpages_4.04-2_all.deb ... 10:17:38 Unpacking manpages (4.04-2) ... 10:17:39 Selecting previously unselected package binutils. 10:17:39 Preparing to unpack .../binutils_2.26.1-1ubuntu1~16.04.8_amd64.deb ... 10:17:39 Unpacking binutils (2.26.1-1ubuntu1~16.04.8) ... 10:17:39 Selecting previously unselected package libc-dev-bin. 10:17:39 Preparing to unpack .../libc-dev-bin_2.23-0ubuntu11_amd64.deb ... 10:17:39 Unpacking libc-dev-bin (2.23-0ubuntu11) ... 10:17:40 Selecting previously unselected package linux-libc-dev:amd64. 10:17:40 Preparing to unpack .../linux-libc-dev_4.4.0-165.193_amd64.deb ... 10:17:40 Unpacking linux-libc-dev:amd64 (4.4.0-165.193) ... 10:17:40 Selecting previously unselected package libc6-dev:amd64. 10:17:40 Preparing to unpack .../libc6-dev_2.23-0ubuntu11_amd64.deb ... 10:17:40 Unpacking libc6-dev:amd64 (2.23-0ubuntu11) ... 10:17:41 Selecting previously unselected package libisl15:amd64. 10:17:41 Preparing to unpack .../libisl15_0.16.1-1_amd64.deb ... 10:17:41 Unpacking libisl15:amd64 (0.16.1-1) ... 10:17:41 Selecting previously unselected package cpp-5. 10:17:41 Preparing to unpack .../cpp-5_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:41 Unpacking cpp-5 (5.4.0-6ubuntu1~16.04.11) ... 10:17:46 Selecting previously unselected package cpp. 10:17:46 Preparing to unpack .../cpp_4%3a5.3.1-1ubuntu1_amd64.deb ... 10:17:46 Unpacking cpp (4:5.3.1-1ubuntu1) ... 10:17:47 Selecting previously unselected package libcc1-0:amd64. 10:17:47 Preparing to unpack .../libcc1-0_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:47 Unpacking libcc1-0:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:47 Selecting previously unselected package libgomp1:amd64. 10:17:47 Preparing to unpack .../libgomp1_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:47 Unpacking libgomp1:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:47 Selecting previously unselected package libitm1:amd64. 10:17:47 Preparing to unpack .../libitm1_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:47 Unpacking libitm1:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:47 Selecting previously unselected package libatomic1:amd64. 10:17:47 Preparing to unpack .../libatomic1_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:47 Unpacking libatomic1:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:47 Selecting previously unselected package libasan2:amd64. 10:17:47 Preparing to unpack .../libasan2_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:47 Unpacking libasan2:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:47 Selecting previously unselected package liblsan0:amd64. 10:17:47 Preparing to unpack .../liblsan0_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:47 Unpacking liblsan0:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:47 Selecting previously unselected package libtsan0:amd64. 10:17:47 Preparing to unpack .../libtsan0_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:48 Unpacking libtsan0:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:48 Selecting previously unselected package libubsan0:amd64. 10:17:48 Preparing to unpack .../libubsan0_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:48 Unpacking libubsan0:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:48 Selecting previously unselected package libcilkrts5:amd64. 10:17:48 Preparing to unpack .../libcilkrts5_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:48 Unpacking libcilkrts5:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:48 Selecting previously unselected package libmpx0:amd64. 10:17:48 Preparing to unpack .../libmpx0_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:48 Unpacking libmpx0:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:48 Selecting previously unselected package libquadmath0:amd64. 10:17:48 Preparing to unpack .../libquadmath0_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:48 Unpacking libquadmath0:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:48 Selecting previously unselected package libgcc-5-dev:amd64. 10:17:48 Preparing to unpack .../libgcc-5-dev_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:48 Unpacking libgcc-5-dev:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:49 Selecting previously unselected package gcc-5. 10:17:49 Preparing to unpack .../gcc-5_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:49 Unpacking gcc-5 (5.4.0-6ubuntu1~16.04.11) ... 10:17:50 Selecting previously unselected package gcc. 10:17:50 Preparing to unpack .../gcc_4%3a5.3.1-1ubuntu1_amd64.deb ... 10:17:50 Unpacking gcc (4:5.3.1-1ubuntu1) ... 10:17:50 Selecting previously unselected package libstdc++-5-dev:amd64. 10:17:50 Preparing to unpack .../libstdc++-5-dev_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:50 Unpacking libstdc++-5-dev:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:17:51 Selecting previously unselected package g++-5. 10:17:51 Preparing to unpack .../g++-5_5.4.0-6ubuntu1~16.04.11_amd64.deb ... 10:17:51 Unpacking g++-5 (5.4.0-6ubuntu1~16.04.11) ... 10:17:53 Selecting previously unselected package g++. 10:17:53 Preparing to unpack .../g++_4%3a5.3.1-1ubuntu1_amd64.deb ... 10:17:53 Unpacking g++ (4:5.3.1-1ubuntu1) ... 10:17:53 Selecting previously unselected package make. 10:17:53 Preparing to unpack .../archives/make_4.1-6_amd64.deb ... 10:17:53 Unpacking make (4.1-6) ... 10:17:54 Selecting previously unselected package libdpkg-perl. 10:17:54 Preparing to unpack .../libdpkg-perl_1.18.4ubuntu1.6_all.deb ... 10:17:54 Unpacking libdpkg-perl (1.18.4ubuntu1.6) ... 10:17:54 Selecting previously unselected package xz-utils. 10:17:54 Preparing to unpack .../xz-utils_5.1.1alpha+20120614-2ubuntu2_amd64.deb ... 10:17:54 Unpacking xz-utils (5.1.1alpha+20120614-2ubuntu2) ... 10:17:54 Selecting previously unselected package patch. 10:17:54 Preparing to unpack .../patch_2.7.5-1ubuntu0.16.04.2_amd64.deb ... 10:17:54 Unpacking patch (2.7.5-1ubuntu0.16.04.2) ... 10:17:54 Selecting previously unselected package dpkg-dev. 10:17:54 Preparing to unpack .../dpkg-dev_1.18.4ubuntu1.6_all.deb ... 10:17:54 Unpacking dpkg-dev (1.18.4ubuntu1.6) ... 10:17:54 Selecting previously unselected package build-essential. 10:17:54 Preparing to unpack .../build-essential_12.1ubuntu2_amd64.deb ... 10:17:54 Unpacking build-essential (12.1ubuntu2) ... 10:17:54 Selecting previously unselected package ccache. 10:17:54 Preparing to unpack .../ccache_3.2.4-1_amd64.deb ... 10:17:54 Unpacking ccache (3.2.4-1) ... 10:17:54 Selecting previously unselected package libfakeroot:amd64. 10:17:54 Preparing to unpack .../libfakeroot_1.20.2-1ubuntu1_amd64.deb ... 10:17:54 Unpacking libfakeroot:amd64 (1.20.2-1ubuntu1) ... 10:17:55 Selecting previously unselected package fakeroot. 10:17:55 Preparing to unpack .../fakeroot_1.20.2-1ubuntu1_amd64.deb ... 10:17:55 Unpacking fakeroot (1.20.2-1ubuntu1) ... 10:17:55 Selecting previously unselected package libalgorithm-diff-perl. 10:17:55 Preparing to unpack .../libalgorithm-diff-perl_1.19.03-1_all.deb ... 10:17:55 Unpacking libalgorithm-diff-perl (1.19.03-1) ... 10:17:55 Selecting previously unselected package libalgorithm-diff-xs-perl. 10:17:55 Preparing to unpack .../libalgorithm-diff-xs-perl_0.04-4build1_amd64.deb ... 10:17:55 Unpacking libalgorithm-diff-xs-perl (0.04-4build1) ... 10:17:55 Selecting previously unselected package libalgorithm-merge-perl. 10:17:55 Preparing to unpack .../libalgorithm-merge-perl_0.08-3_all.deb ... 10:17:55 Unpacking libalgorithm-merge-perl (0.08-3) ... 10:17:55 Selecting previously unselected package libfile-fcntllock-perl. 10:17:55 Preparing to unpack .../libfile-fcntllock-perl_0.22-3_amd64.deb ... 10:17:55 Unpacking libfile-fcntllock-perl (0.22-3) ... 10:17:55 Selecting previously unselected package manpages-dev. 10:17:55 Preparing to unpack .../manpages-dev_4.04-2_all.deb ... 10:17:55 Unpacking manpages-dev (4.04-2) ... 10:17:56 Selecting previously unselected package rename. 10:17:56 Preparing to unpack .../archives/rename_0.20-4_all.deb ... 10:17:56 Unpacking rename (0.20-4) ... 10:17:56 Processing triggers for libc-bin (2.23-0ubuntu11) ... 10:17:56 Processing triggers for systemd (229-4ubuntu21.22) ... 10:17:57 Setting up libatm1:amd64 (1:2.5.1-1.5) ... 10:17:57 Setting up libmnl0:amd64 (1.0.3-5) ... 10:17:57 Setting up libgdbm3:amd64 (1.8.3-13.1) ... 10:17:57 Setting up perl-modules-5.22 (5.22.1-9ubuntu0.6) ... 10:17:57 Setting up libperl5.22:amd64 (5.22.1-9ubuntu0.6) ... 10:17:57 Setting up perl (5.22.1-9ubuntu0.6) ... 10:17:57 update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode 10:17:57 Setting up libgmp10:amd64 (2:6.1.0+dfsg-2) ... 10:17:57 Setting up libmpfr4:amd64 (3.1.4-1) ... 10:17:57 Setting up libmpc3:amd64 (1.0.3-1) ... 10:17:57 Setting up bzip2 (1.0.6-8ubuntu0.2) ... 10:17:57 Setting up iproute2 (4.3.0-1ubuntu3.16.04.5) ... 10:17:57 Setting up ifupdown (0.8.10ubuntu1.4) ... 10:17:57 Creating /etc/network/interfaces. 10:18:00 Setting up libisc-export160 (1:9.10.3.dfsg.P4-8ubuntu1.15) ... 10:18:01 Setting up libdns-export162 (1:9.10.3.dfsg.P4-8ubuntu1.15) ... 10:18:01 Setting up isc-dhcp-client (4.3.3-5ubuntu12.10) ... 10:18:01 Setting up isc-dhcp-common (4.3.3-5ubuntu12.10) ... 10:18:01 Setting up libxtables11:amd64 (1.6.0-2ubuntu3) ... 10:18:01 Setting up netbase (5.3) ... 10:18:01 Setting up manpages (4.04-2) ... 10:18:01 Setting up binutils (2.26.1-1ubuntu1~16.04.8) ... 10:18:01 Setting up libc-dev-bin (2.23-0ubuntu11) ... 10:18:01 Setting up linux-libc-dev:amd64 (4.4.0-165.193) ... 10:18:01 Setting up libc6-dev:amd64 (2.23-0ubuntu11) ... 10:18:02 Setting up libisl15:amd64 (0.16.1-1) ... 10:18:02 Setting up cpp-5 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up cpp (4:5.3.1-1ubuntu1) ... 10:18:02 Setting up libcc1-0:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up libgomp1:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up libitm1:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up libatomic1:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up libasan2:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up liblsan0:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up libtsan0:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up libubsan0:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up libcilkrts5:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up libmpx0:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up libquadmath0:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up libgcc-5-dev:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up gcc-5 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up gcc (4:5.3.1-1ubuntu1) ... 10:18:02 Setting up libstdc++-5-dev:amd64 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up g++-5 (5.4.0-6ubuntu1~16.04.11) ... 10:18:02 Setting up g++ (4:5.3.1-1ubuntu1) ... 10:18:02 update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode 10:18:02 Setting up make (4.1-6) ... 10:18:02 Setting up libdpkg-perl (1.18.4ubuntu1.6) ... 10:18:02 Setting up xz-utils (5.1.1alpha+20120614-2ubuntu2) ... 10:18:02 update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode 10:18:02 Setting up patch (2.7.5-1ubuntu0.16.04.2) ... 10:18:02 Setting up dpkg-dev (1.18.4ubuntu1.6) ... 10:18:02 Setting up build-essential (12.1ubuntu2) ... 10:18:02 Setting up ccache (3.2.4-1) ... 10:18:02 Updating symlinks in /usr/lib/ccache ... 10:18:02 Setting up libfakeroot:amd64 (1.20.2-1ubuntu1) ... 10:18:02 Setting up fakeroot (1.20.2-1ubuntu1) ... 10:18:02 update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode 10:18:02 Setting up libalgorithm-diff-perl (1.19.03-1) ... 10:18:02 Setting up libalgorithm-diff-xs-perl (0.04-4build1) ... 10:18:02 Setting up libalgorithm-merge-perl (0.08-3) ... 10:18:02 Setting up libfile-fcntllock-perl (0.22-3) ... 10:18:02 Setting up manpages-dev (4.04-2) ... 10:18:02 Setting up rename (0.20-4) ... 10:18:03 update-alternatives: using /usr/bin/file-rename to provide /usr/bin/rename (rename) in auto mode 10:18:03 Processing triggers for libc-bin (2.23-0ubuntu11) ... 10:18:03 Processing triggers for systemd (229-4ubuntu21.22) ... 10:18:03 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:18:03 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:18:03 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:18:03 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:18:03 Invoking 'apt-get clean' 10:18:19 ---> 09a6e71a80ce 10:18:20 Removing intermediate container 682b963099e3 10:18:20 Step 22 : RUN echo "apt-src: 0.25.1-0.2" && python3 -u /tmp/wrapper_scripts/apt.py update-install-clean -q -y -o Debug::pkgProblemResolver=yes apt-src 10:18:20 ---> Running in b2c3b02f833e 10:18:20 apt-src: 0.25.1-0.2 10:18:20 Invoking 'apt-get update' 10:18:20 Get:1 http://10.210.9.154/ubuntu/building xenial InRelease [2,856 B] 10:18:20 Hit:2 http://archive.ubuntu.com/ubuntu xenial InRelease 10:18:20 Hit:3 http://archive.ubuntu.com/ubuntu xenial-updates InRelease 10:18:20 Hit:4 http://archive.ubuntu.com/ubuntu xenial-backports InRelease 10:18:20 Hit:5 http://archive.ubuntu.com/ubuntu xenial-security InRelease 10:18:21 Hit:6 http://packages.ros.org/ros/ubuntu xenial InRelease 10:18:21 Hit:7 http://security.ubuntu.com/ubuntu xenial-security InRelease 10:18:21 Fetched 2,856 B in 0s (3,246 B/s) 10:18:23 Reading package lists... 10:18:23 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:18:23 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:18:23 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:18:23 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:18:23 W: http://10.210.9.154/ubuntu/building/dists/xenial/InRelease: Signature by key 0379D44201EF3A91028107A8DCD74318AED39854 uses weak digest algorithm (SHA1) 10:18:23 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:18:23 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:18:23 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:18:23 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:18:23 Invoking 'apt-get install -q -y -o Debug::pkgProblemResolver=yes apt-src' 10:18:24 Reading package lists... 10:18:25 Building dependency tree... 10:18:25 Reading state information... 10:18:25 Starting pkgProblemResolver with broken count: 0 10:18:25 Starting 2 pkgProblemResolver with broken count: 0 10:18:25 Done 10:18:25 The following additional packages will be installed: 10:18:25 libapt-pkg-perl sudo 10:18:25 The following NEW packages will be installed: 10:18:25 apt-src libapt-pkg-perl sudo 10:18:25 0 upgraded, 3 newly installed, 0 to remove and 4 not upgraded. 10:18:25 Need to get 490 kB of archives. 10:18:25 After this operation, 1,953 kB of additional disk space will be used. 10:18:25 Get:1 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 sudo amd64 1.8.16-0ubuntu1.7 [390 kB] 10:18:25 Get:2 http://archive.ubuntu.com/ubuntu xenial/main amd64 libapt-pkg-perl amd64 0.1.29build7 [65.3 kB] 10:18:25 Get:3 http://archive.ubuntu.com/ubuntu xenial/universe amd64 apt-src all 0.25.1-0.2 [34.5 kB] 10:18:25 debconf: delaying package configuration, since apt-utils is not installed 10:18:25 Fetched 490 kB in 0s (3,197 kB/s) 10:18:25 Selecting previously unselected package sudo. 10:18:25 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13885 files and directories currently installed.) 10:18:25 Preparing to unpack .../sudo_1.8.16-0ubuntu1.7_amd64.deb ... 10:18:25 Unpacking sudo (1.8.16-0ubuntu1.7) ... 10:18:26 Selecting previously unselected package libapt-pkg-perl. 10:18:26 Preparing to unpack .../libapt-pkg-perl_0.1.29build7_amd64.deb ... 10:18:26 Unpacking libapt-pkg-perl (0.1.29build7) ... 10:18:26 Selecting previously unselected package apt-src. 10:18:26 Preparing to unpack .../apt-src_0.25.1-0.2_all.deb ... 10:18:26 Unpacking apt-src (0.25.1-0.2) ... 10:18:26 Setting up sudo (1.8.16-0ubuntu1.7) ... 10:18:26 Setting up libapt-pkg-perl (0.1.29build7) ... 10:18:26 Setting up apt-src (0.25.1-0.2) ... 10:18:26 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:18:26 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:18:26 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:18:26 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:18:26 Invoking 'apt-get clean' 10:18:27 ---> 5f395f8b4dda 10:18:27 Removing intermediate container b2c3b02f833e 10:18:27 Step 23 : RUN echo "debhelper: 10.2.2ubuntu1~ubuntu16.04.1" && python3 -u /tmp/wrapper_scripts/apt.py update-install-clean -q -y -o Debug::pkgProblemResolver=yes debhelper 10:18:28 ---> Running in 59045b40f7d4 10:18:28 debhelper: 10.2.2ubuntu1~ubuntu16.04.1 10:18:28 Invoking 'apt-get update' 10:18:28 Hit:1 http://10.210.9.154/ubuntu/building xenial InRelease 10:18:28 Hit:2 http://archive.ubuntu.com/ubuntu xenial InRelease 10:18:28 Hit:3 http://security.ubuntu.com/ubuntu xenial-security InRelease 10:18:28 Hit:4 http://archive.ubuntu.com/ubuntu xenial-updates InRelease 10:18:28 Hit:5 http://archive.ubuntu.com/ubuntu xenial-backports InRelease 10:18:28 Hit:6 http://archive.ubuntu.com/ubuntu xenial-security InRelease 10:18:28 Hit:7 http://packages.ros.org/ros/ubuntu xenial InRelease 10:18:31 Reading package lists... 10:18:31 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:18:31 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:18:31 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:18:31 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:18:31 W: http://10.210.9.154/ubuntu/building/dists/xenial/InRelease: Signature by key 0379D44201EF3A91028107A8DCD74318AED39854 uses weak digest algorithm (SHA1) 10:18:31 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:18:31 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:18:31 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:18:31 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:18:31 Invoking 'apt-get install -q -y -o Debug::pkgProblemResolver=yes debhelper' 10:18:32 Reading package lists... 10:18:32 Building dependency tree... 10:18:32 Reading state information... 10:18:33 Starting pkgProblemResolver with broken count: 0 10:18:33 Starting 2 pkgProblemResolver with broken count: 0 10:18:33 Done 10:18:33 The following additional packages will be installed: 10:18:33 autotools-dev bsdmainutils ca-certificates curl dh-strip-nondeterminism 10:18:33 gettext gettext-base groff-base intltool-debian krb5-locales 10:18:33 libarchive-zip-perl libasn1-8-heimdal libasprintf-dev libasprintf0v5 10:18:33 libcroco3 libcurl3-gnutls libffi6 libfile-stripnondeterminism-perl 10:18:33 libgettextpo-dev libgettextpo0 libglib2.0-0 libglib2.0-data libgnutls30 10:18:33 libgssapi-krb5-2 libgssapi3-heimdal libhcrypto4-heimdal libheimbase1-heimdal 10:18:33 libheimntlm0-heimdal libhogweed4 libhx509-5-heimdal libicu55 libidn11 10:18:33 libk5crypto3 libkeyutils1 libkrb5-26-heimdal libkrb5-3 libkrb5support0 10:18:33 libldap-2.4-2 libmail-sendmail-perl libnettle6 libp11-kit0 libpipeline1 10:18:33 libroken18-heimdal librtmp1 libsasl2-2 libsasl2-modules libsasl2-modules-db 10:18:33 libsys-hostname-long-perl libtasn1-6 libtimedate-perl libunistring0 10:18:33 libwind0-heimdal libxml2 man-db openssl po-debconf sgml-base 10:18:33 shared-mime-info xdg-user-dirs xml-core 10:18:33 Suggested packages: 10:18:33 wamerican | wordlist whois vacation dh-make gettext-doc autopoint groff 10:18:33 gnutls-bin krb5-doc krb5-user libsasl2-modules-otp libsasl2-modules-ldap 10:18:33 libsasl2-modules-sql libsasl2-modules-gssapi-mit 10:18:33 | libsasl2-modules-gssapi-heimdal less www-browser libmail-box-perl 10:18:33 sgml-base-doc 10:18:33 The following NEW packages will be installed: 10:18:33 autotools-dev bsdmainutils ca-certificates curl debhelper 10:18:33 dh-strip-nondeterminism gettext gettext-base groff-base intltool-debian 10:18:33 krb5-locales libarchive-zip-perl libasn1-8-heimdal libasprintf-dev 10:18:33 libasprintf0v5 libcroco3 libcurl3-gnutls libffi6 10:18:33 libfile-stripnondeterminism-perl libgettextpo-dev libgettextpo0 libglib2.0-0 10:18:33 libglib2.0-data libgnutls30 libgssapi-krb5-2 libgssapi3-heimdal 10:18:33 libhcrypto4-heimdal libheimbase1-heimdal libheimntlm0-heimdal libhogweed4 10:18:33 libhx509-5-heimdal libicu55 libidn11 libk5crypto3 libkeyutils1 10:18:33 libkrb5-26-heimdal libkrb5-3 libkrb5support0 libldap-2.4-2 10:18:33 libmail-sendmail-perl libnettle6 libp11-kit0 libpipeline1 libroken18-heimdal 10:18:33 librtmp1 libsasl2-2 libsasl2-modules libsasl2-modules-db 10:18:33 libsys-hostname-long-perl libtasn1-6 libtimedate-perl libunistring0 10:18:33 libwind0-heimdal libxml2 man-db openssl po-debconf sgml-base 10:18:33 shared-mime-info xdg-user-dirs xml-core 10:18:33 0 upgraded, 61 newly installed, 0 to remove and 4 not upgraded. 10:18:33 Need to get 18.9 MB of archives. 10:18:33 After this operation, 70.5 MB of additional disk space will be used. 10:18:33 Get:1 http://archive.ubuntu.com/ubuntu xenial/main amd64 libffi6 amd64 3.2.1-4 [17.8 kB] 10:18:33 Get:2 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libglib2.0-0 amd64 2.48.2-0ubuntu4.4 [1,120 kB] 10:18:33 Get:3 http://archive.ubuntu.com/ubuntu xenial/main amd64 groff-base amd64 1.22.3-7 [1,151 kB] 10:18:33 Get:4 http://archive.ubuntu.com/ubuntu xenial/main amd64 bsdmainutils amd64 9.0.6ubuntu3 [174 kB] 10:18:33 Get:5 http://archive.ubuntu.com/ubuntu xenial/main amd64 libpipeline1 amd64 1.4.1-2 [24.6 kB] 10:18:33 Get:6 http://archive.ubuntu.com/ubuntu xenial/main amd64 man-db amd64 2.7.5-1 [854 kB] 10:18:33 Get:7 http://archive.ubuntu.com/ubuntu xenial/main amd64 sgml-base all 1.26+nmu4ubuntu1 [12.5 kB] 10:18:33 Get:8 http://archive.ubuntu.com/ubuntu xenial/main amd64 libunistring0 amd64 0.9.3-5.2ubuntu1 [279 kB] 10:18:33 Get:9 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libnettle6 amd64 3.2-1ubuntu0.16.04.1 [93.5 kB] 10:18:33 Get:10 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libhogweed4 amd64 3.2-1ubuntu0.16.04.1 [136 kB] 10:18:33 Get:11 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libidn11 amd64 1.32-3ubuntu1.2 [46.5 kB] 10:18:33 Get:12 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libp11-kit0 amd64 0.23.2-5~ubuntu16.04.1 [105 kB] 10:18:33 Get:13 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libtasn1-6 amd64 4.7-3ubuntu0.16.04.3 [43.5 kB] 10:18:33 Get:14 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libgnutls30 amd64 3.4.10-4ubuntu1.5 [548 kB] 10:18:34 Get:15 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 openssl amd64 1.0.2g-1ubuntu4.15 [492 kB] 10:18:34 Get:16 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 ca-certificates all 20170717~16.04.2 [167 kB] 10:18:34 Get:17 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libasprintf0v5 amd64 0.19.7-2ubuntu3.1 [6,568 B] 10:18:34 Get:18 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 gettext-base amd64 0.19.7-2ubuntu3.1 [48.0 kB] 10:18:34 Get:19 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 krb5-locales all 1.13.2+dfsg-5ubuntu2.1 [13.6 kB] 10:18:34 Get:20 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libroken18-heimdal amd64 1.7~git20150920+dfsg-4ubuntu1.16.04.1 [41.4 kB] 10:18:34 Get:21 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libasn1-8-heimdal amd64 1.7~git20150920+dfsg-4ubuntu1.16.04.1 [174 kB] 10:18:34 Get:22 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libkrb5support0 amd64 1.13.2+dfsg-5ubuntu2.1 [31.2 kB] 10:18:34 Get:23 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libk5crypto3 amd64 1.13.2+dfsg-5ubuntu2.1 [81.3 kB] 10:18:34 Get:24 http://archive.ubuntu.com/ubuntu xenial/main amd64 libkeyutils1 amd64 1.5.9-8ubuntu1 [9,904 B] 10:18:34 Get:25 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libkrb5-3 amd64 1.13.2+dfsg-5ubuntu2.1 [273 kB] 10:18:34 Get:26 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libgssapi-krb5-2 amd64 1.13.2+dfsg-5ubuntu2.1 [120 kB] 10:18:34 Get:27 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libhcrypto4-heimdal amd64 1.7~git20150920+dfsg-4ubuntu1.16.04.1 [85.0 kB] 10:18:34 Get:28 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libheimbase1-heimdal amd64 1.7~git20150920+dfsg-4ubuntu1.16.04.1 [29.3 kB] 10:18:34 Get:29 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libwind0-heimdal amd64 1.7~git20150920+dfsg-4ubuntu1.16.04.1 [47.8 kB] 10:18:34 Get:30 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libhx509-5-heimdal amd64 1.7~git20150920+dfsg-4ubuntu1.16.04.1 [107 kB] 10:18:34 Get:31 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libkrb5-26-heimdal amd64 1.7~git20150920+dfsg-4ubuntu1.16.04.1 [202 kB] 10:18:34 Get:32 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libheimntlm0-heimdal amd64 1.7~git20150920+dfsg-4ubuntu1.16.04.1 [15.1 kB] 10:18:35 Get:33 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libgssapi3-heimdal amd64 1.7~git20150920+dfsg-4ubuntu1.16.04.1 [96.1 kB] 10:18:35 Get:34 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libsasl2-modules-db amd64 2.1.26.dfsg1-14ubuntu0.1 [14.5 kB] 10:18:35 Get:35 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libsasl2-2 amd64 2.1.26.dfsg1-14ubuntu0.1 [48.6 kB] 10:18:35 Get:36 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libldap-2.4-2 amd64 2.4.42+dfsg-2ubuntu3.7 [160 kB] 10:18:35 Get:37 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 librtmp1 amd64 2.4+20151223.gitfa8646d-1ubuntu0.1 [54.4 kB] 10:18:35 Get:38 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libcurl3-gnutls amd64 7.47.0-1ubuntu2.14 [184 kB] 10:18:35 Get:39 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libglib2.0-data all 2.48.2-0ubuntu4.4 [131 kB] 10:18:35 Get:40 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libicu55 amd64 55.1-7ubuntu0.4 [7,646 kB] 10:18:35 Get:41 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libsasl2-modules amd64 2.1.26.dfsg1-14ubuntu0.1 [47.5 kB] 10:18:35 Get:42 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libxml2 amd64 2.9.3+dfsg1-1ubuntu0.6 [697 kB] 10:18:35 Get:43 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 shared-mime-info amd64 1.5-2ubuntu0.2 [405 kB] 10:18:35 Get:44 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 xdg-user-dirs amd64 0.15-2ubuntu6.16.04.1 [61.8 kB] 10:18:35 Get:45 http://archive.ubuntu.com/ubuntu xenial/main amd64 xml-core all 0.13+nmu2 [23.3 kB] 10:18:35 Get:46 http://archive.ubuntu.com/ubuntu xenial/main amd64 autotools-dev all 20150820.1 [39.8 kB] 10:18:35 Get:47 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 curl amd64 7.47.0-1ubuntu2.14 [139 kB] 10:18:35 Get:48 http://archive.ubuntu.com/ubuntu xenial/main amd64 libcroco3 amd64 0.6.11-1 [81.6 kB] 10:18:35 Get:49 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 gettext amd64 0.19.7-2ubuntu3.1 [1,082 kB] 10:18:36 Get:50 http://archive.ubuntu.com/ubuntu xenial/main amd64 intltool-debian all 0.35.0+20060710.4 [24.9 kB] 10:18:36 Get:51 http://archive.ubuntu.com/ubuntu xenial/main amd64 po-debconf all 1.0.19 [234 kB] 10:18:36 Get:52 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libarchive-zip-perl all 1.56-2ubuntu0.1 [84.7 kB] 10:18:36 Get:53 http://archive.ubuntu.com/ubuntu xenial/main amd64 libfile-stripnondeterminism-perl all 0.015-1 [10.3 kB] 10:18:36 Get:54 http://archive.ubuntu.com/ubuntu xenial/main amd64 libtimedate-perl all 2.3000-2 [37.5 kB] 10:18:36 Get:55 http://archive.ubuntu.com/ubuntu xenial/main amd64 dh-strip-nondeterminism all 0.015-1 [4,864 B] 10:18:36 Get:56 http://archive.ubuntu.com/ubuntu xenial/main amd64 debhelper all 9.20160115ubuntu3 [739 kB] 10:18:36 Get:57 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libasprintf-dev amd64 0.19.7-2ubuntu3.1 [4,778 B] 10:18:36 Get:58 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libgettextpo0 amd64 0.19.7-2ubuntu3.1 [125 kB] 10:18:36 Get:59 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libgettextpo-dev amd64 0.19.7-2ubuntu3.1 [141 kB] 10:18:36 Get:60 http://archive.ubuntu.com/ubuntu xenial/main amd64 libsys-hostname-long-perl all 1.5-1 [11.7 kB] 10:18:36 Get:61 http://archive.ubuntu.com/ubuntu xenial/main amd64 libmail-sendmail-perl all 0.79.16-1 [26.5 kB] 10:18:36 debconf: delaying package configuration, since apt-utils is not installed 10:18:36 Fetched 18.9 MB in 3s (5,694 kB/s) 10:18:37 Selecting previously unselected package libffi6:amd64. 10:18:37 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13978 files and directories currently installed.) 10:18:37 Preparing to unpack .../libffi6_3.2.1-4_amd64.deb ... 10:18:37 Unpacking libffi6:amd64 (3.2.1-4) ... 10:18:37 Selecting previously unselected package libglib2.0-0:amd64. 10:18:37 Preparing to unpack .../libglib2.0-0_2.48.2-0ubuntu4.4_amd64.deb ... 10:18:37 Unpacking libglib2.0-0:amd64 (2.48.2-0ubuntu4.4) ... 10:18:37 Selecting previously unselected package groff-base. 10:18:37 Preparing to unpack .../groff-base_1.22.3-7_amd64.deb ... 10:18:37 Unpacking groff-base (1.22.3-7) ... 10:18:37 Selecting previously unselected package bsdmainutils. 10:18:37 Preparing to unpack .../bsdmainutils_9.0.6ubuntu3_amd64.deb ... 10:18:37 Unpacking bsdmainutils (9.0.6ubuntu3) ... 10:18:37 Selecting previously unselected package libpipeline1:amd64. 10:18:37 Preparing to unpack .../libpipeline1_1.4.1-2_amd64.deb ... 10:18:37 Unpacking libpipeline1:amd64 (1.4.1-2) ... 10:18:38 Selecting previously unselected package man-db. 10:18:38 Preparing to unpack .../man-db_2.7.5-1_amd64.deb ... 10:18:38 Unpacking man-db (2.7.5-1) ... 10:18:38 Selecting previously unselected package sgml-base. 10:18:38 Preparing to unpack .../sgml-base_1.26+nmu4ubuntu1_all.deb ... 10:18:38 Unpacking sgml-base (1.26+nmu4ubuntu1) ... 10:18:38 Selecting previously unselected package libunistring0:amd64. 10:18:38 Preparing to unpack .../libunistring0_0.9.3-5.2ubuntu1_amd64.deb ... 10:18:38 Unpacking libunistring0:amd64 (0.9.3-5.2ubuntu1) ... 10:18:38 Selecting previously unselected package libnettle6:amd64. 10:18:38 Preparing to unpack .../libnettle6_3.2-1ubuntu0.16.04.1_amd64.deb ... 10:18:38 Unpacking libnettle6:amd64 (3.2-1ubuntu0.16.04.1) ... 10:18:38 Selecting previously unselected package libhogweed4:amd64. 10:18:38 Preparing to unpack .../libhogweed4_3.2-1ubuntu0.16.04.1_amd64.deb ... 10:18:38 Unpacking libhogweed4:amd64 (3.2-1ubuntu0.16.04.1) ... 10:18:38 Selecting previously unselected package libidn11:amd64. 10:18:38 Preparing to unpack .../libidn11_1.32-3ubuntu1.2_amd64.deb ... 10:18:38 Unpacking libidn11:amd64 (1.32-3ubuntu1.2) ... 10:18:38 Selecting previously unselected package libp11-kit0:amd64. 10:18:38 Preparing to unpack .../libp11-kit0_0.23.2-5~ubuntu16.04.1_amd64.deb ... 10:18:38 Unpacking libp11-kit0:amd64 (0.23.2-5~ubuntu16.04.1) ... 10:18:38 Selecting previously unselected package libtasn1-6:amd64. 10:18:38 Preparing to unpack .../libtasn1-6_4.7-3ubuntu0.16.04.3_amd64.deb ... 10:18:38 Unpacking libtasn1-6:amd64 (4.7-3ubuntu0.16.04.3) ... 10:18:39 Selecting previously unselected package libgnutls30:amd64. 10:18:39 Preparing to unpack .../libgnutls30_3.4.10-4ubuntu1.5_amd64.deb ... 10:18:39 Unpacking libgnutls30:amd64 (3.4.10-4ubuntu1.5) ... 10:18:39 Selecting previously unselected package openssl. 10:18:39 Preparing to unpack .../openssl_1.0.2g-1ubuntu4.15_amd64.deb ... 10:18:39 Unpacking openssl (1.0.2g-1ubuntu4.15) ... 10:18:39 Selecting previously unselected package ca-certificates. 10:18:39 Preparing to unpack .../ca-certificates_20170717~16.04.2_all.deb ... 10:18:39 Unpacking ca-certificates (20170717~16.04.2) ... 10:18:39 Selecting previously unselected package libasprintf0v5:amd64. 10:18:39 Preparing to unpack .../libasprintf0v5_0.19.7-2ubuntu3.1_amd64.deb ... 10:18:39 Unpacking libasprintf0v5:amd64 (0.19.7-2ubuntu3.1) ... 10:18:39 Selecting previously unselected package gettext-base. 10:18:39 Preparing to unpack .../gettext-base_0.19.7-2ubuntu3.1_amd64.deb ... 10:18:39 Unpacking gettext-base (0.19.7-2ubuntu3.1) ... 10:18:39 Selecting previously unselected package krb5-locales. 10:18:39 Preparing to unpack .../krb5-locales_1.13.2+dfsg-5ubuntu2.1_all.deb ... 10:18:39 Unpacking krb5-locales (1.13.2+dfsg-5ubuntu2.1) ... 10:18:39 Selecting previously unselected package libroken18-heimdal:amd64. 10:18:39 Preparing to unpack .../libroken18-heimdal_1.7~git20150920+dfsg-4ubuntu1.16.04.1_amd64.deb ... 10:18:39 Unpacking libroken18-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:18:39 Selecting previously unselected package libasn1-8-heimdal:amd64. 10:18:39 Preparing to unpack .../libasn1-8-heimdal_1.7~git20150920+dfsg-4ubuntu1.16.04.1_amd64.deb ... 10:18:39 Unpacking libasn1-8-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:18:40 Selecting previously unselected package libkrb5support0:amd64. 10:18:40 Preparing to unpack .../libkrb5support0_1.13.2+dfsg-5ubuntu2.1_amd64.deb ... 10:18:40 Unpacking libkrb5support0:amd64 (1.13.2+dfsg-5ubuntu2.1) ... 10:18:40 Selecting previously unselected package libk5crypto3:amd64. 10:18:40 Preparing to unpack .../libk5crypto3_1.13.2+dfsg-5ubuntu2.1_amd64.deb ... 10:18:40 Unpacking libk5crypto3:amd64 (1.13.2+dfsg-5ubuntu2.1) ... 10:18:40 Selecting previously unselected package libkeyutils1:amd64. 10:18:40 Preparing to unpack .../libkeyutils1_1.5.9-8ubuntu1_amd64.deb ... 10:18:40 Unpacking libkeyutils1:amd64 (1.5.9-8ubuntu1) ... 10:18:40 Selecting previously unselected package libkrb5-3:amd64. 10:18:40 Preparing to unpack .../libkrb5-3_1.13.2+dfsg-5ubuntu2.1_amd64.deb ... 10:18:40 Unpacking libkrb5-3:amd64 (1.13.2+dfsg-5ubuntu2.1) ... 10:18:40 Selecting previously unselected package libgssapi-krb5-2:amd64. 10:18:40 Preparing to unpack .../libgssapi-krb5-2_1.13.2+dfsg-5ubuntu2.1_amd64.deb ... 10:18:40 Unpacking libgssapi-krb5-2:amd64 (1.13.2+dfsg-5ubuntu2.1) ... 10:18:40 Selecting previously unselected package libhcrypto4-heimdal:amd64. 10:18:40 Preparing to unpack .../libhcrypto4-heimdal_1.7~git20150920+dfsg-4ubuntu1.16.04.1_amd64.deb ... 10:18:40 Unpacking libhcrypto4-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:18:40 Selecting previously unselected package libheimbase1-heimdal:amd64. 10:18:40 Preparing to unpack .../libheimbase1-heimdal_1.7~git20150920+dfsg-4ubuntu1.16.04.1_amd64.deb ... 10:18:40 Unpacking libheimbase1-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:18:40 Selecting previously unselected package libwind0-heimdal:amd64. 10:18:40 Preparing to unpack .../libwind0-heimdal_1.7~git20150920+dfsg-4ubuntu1.16.04.1_amd64.deb ... 10:18:40 Unpacking libwind0-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:18:40 Selecting previously unselected package libhx509-5-heimdal:amd64. 10:18:40 Preparing to unpack .../libhx509-5-heimdal_1.7~git20150920+dfsg-4ubuntu1.16.04.1_amd64.deb ... 10:18:40 Unpacking libhx509-5-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:18:41 Selecting previously unselected package libkrb5-26-heimdal:amd64. 10:18:41 Preparing to unpack .../libkrb5-26-heimdal_1.7~git20150920+dfsg-4ubuntu1.16.04.1_amd64.deb ... 10:18:41 Unpacking libkrb5-26-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:18:41 Selecting previously unselected package libheimntlm0-heimdal:amd64. 10:18:41 Preparing to unpack .../libheimntlm0-heimdal_1.7~git20150920+dfsg-4ubuntu1.16.04.1_amd64.deb ... 10:18:41 Unpacking libheimntlm0-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:18:41 Selecting previously unselected package libgssapi3-heimdal:amd64. 10:18:41 Preparing to unpack .../libgssapi3-heimdal_1.7~git20150920+dfsg-4ubuntu1.16.04.1_amd64.deb ... 10:18:41 Unpacking libgssapi3-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:18:41 Selecting previously unselected package libsasl2-modules-db:amd64. 10:18:41 Preparing to unpack .../libsasl2-modules-db_2.1.26.dfsg1-14ubuntu0.1_amd64.deb ... 10:18:41 Unpacking libsasl2-modules-db:amd64 (2.1.26.dfsg1-14ubuntu0.1) ... 10:18:43 Selecting previously unselected package libsasl2-2:amd64. 10:18:43 Preparing to unpack .../libsasl2-2_2.1.26.dfsg1-14ubuntu0.1_amd64.deb ... 10:18:43 Unpacking libsasl2-2:amd64 (2.1.26.dfsg1-14ubuntu0.1) ... 10:18:43 Selecting previously unselected package libldap-2.4-2:amd64. 10:18:43 Preparing to unpack .../libldap-2.4-2_2.4.42+dfsg-2ubuntu3.7_amd64.deb ... 10:18:43 Unpacking libldap-2.4-2:amd64 (2.4.42+dfsg-2ubuntu3.7) ... 10:18:43 Selecting previously unselected package librtmp1:amd64. 10:18:43 Preparing to unpack .../librtmp1_2.4+20151223.gitfa8646d-1ubuntu0.1_amd64.deb ... 10:18:43 Unpacking librtmp1:amd64 (2.4+20151223.gitfa8646d-1ubuntu0.1) ... 10:18:43 Selecting previously unselected package libcurl3-gnutls:amd64. 10:18:43 Preparing to unpack .../libcurl3-gnutls_7.47.0-1ubuntu2.14_amd64.deb ... 10:18:43 Unpacking libcurl3-gnutls:amd64 (7.47.0-1ubuntu2.14) ... 10:18:43 Selecting previously unselected package libglib2.0-data. 10:18:43 Preparing to unpack .../libglib2.0-data_2.48.2-0ubuntu4.4_all.deb ... 10:18:43 Unpacking libglib2.0-data (2.48.2-0ubuntu4.4) ... 10:18:43 Selecting previously unselected package libicu55:amd64. 10:18:43 Preparing to unpack .../libicu55_55.1-7ubuntu0.4_amd64.deb ... 10:18:43 Unpacking libicu55:amd64 (55.1-7ubuntu0.4) ... 10:18:44 Selecting previously unselected package libsasl2-modules:amd64. 10:18:44 Preparing to unpack .../libsasl2-modules_2.1.26.dfsg1-14ubuntu0.1_amd64.deb ... 10:18:44 Unpacking libsasl2-modules:amd64 (2.1.26.dfsg1-14ubuntu0.1) ... 10:18:45 Selecting previously unselected package libxml2:amd64. 10:18:45 Preparing to unpack .../libxml2_2.9.3+dfsg1-1ubuntu0.6_amd64.deb ... 10:18:45 Unpacking libxml2:amd64 (2.9.3+dfsg1-1ubuntu0.6) ... 10:18:45 Selecting previously unselected package shared-mime-info. 10:18:45 Preparing to unpack .../shared-mime-info_1.5-2ubuntu0.2_amd64.deb ... 10:18:45 Unpacking shared-mime-info (1.5-2ubuntu0.2) ... 10:18:45 Selecting previously unselected package xdg-user-dirs. 10:18:45 Preparing to unpack .../xdg-user-dirs_0.15-2ubuntu6.16.04.1_amd64.deb ... 10:18:45 Unpacking xdg-user-dirs (0.15-2ubuntu6.16.04.1) ... 10:18:45 Selecting previously unselected package xml-core. 10:18:45 Preparing to unpack .../xml-core_0.13+nmu2_all.deb ... 10:18:45 Unpacking xml-core (0.13+nmu2) ... 10:18:45 Selecting previously unselected package autotools-dev. 10:18:45 Preparing to unpack .../autotools-dev_20150820.1_all.deb ... 10:18:45 Unpacking autotools-dev (20150820.1) ... 10:18:45 Selecting previously unselected package curl. 10:18:45 Preparing to unpack .../curl_7.47.0-1ubuntu2.14_amd64.deb ... 10:18:45 Unpacking curl (7.47.0-1ubuntu2.14) ... 10:18:45 Selecting previously unselected package libcroco3:amd64. 10:18:45 Preparing to unpack .../libcroco3_0.6.11-1_amd64.deb ... 10:18:45 Unpacking libcroco3:amd64 (0.6.11-1) ... 10:18:46 Selecting previously unselected package gettext. 10:18:46 Preparing to unpack .../gettext_0.19.7-2ubuntu3.1_amd64.deb ... 10:18:46 Unpacking gettext (0.19.7-2ubuntu3.1) ... 10:18:46 Selecting previously unselected package intltool-debian. 10:18:46 Preparing to unpack .../intltool-debian_0.35.0+20060710.4_all.deb ... 10:18:46 Unpacking intltool-debian (0.35.0+20060710.4) ... 10:18:46 Selecting previously unselected package po-debconf. 10:18:46 Preparing to unpack .../po-debconf_1.0.19_all.deb ... 10:18:46 Unpacking po-debconf (1.0.19) ... 10:18:46 Selecting previously unselected package libarchive-zip-perl. 10:18:46 Preparing to unpack .../libarchive-zip-perl_1.56-2ubuntu0.1_all.deb ... 10:18:46 Unpacking libarchive-zip-perl (1.56-2ubuntu0.1) ... 10:18:46 Selecting previously unselected package libfile-stripnondeterminism-perl. 10:18:46 Preparing to unpack .../libfile-stripnondeterminism-perl_0.015-1_all.deb ... 10:18:46 Unpacking libfile-stripnondeterminism-perl (0.015-1) ... 10:18:46 Selecting previously unselected package libtimedate-perl. 10:18:46 Preparing to unpack .../libtimedate-perl_2.3000-2_all.deb ... 10:18:46 Unpacking libtimedate-perl (2.3000-2) ... 10:18:46 Selecting previously unselected package dh-strip-nondeterminism. 10:18:46 Preparing to unpack .../dh-strip-nondeterminism_0.015-1_all.deb ... 10:18:46 Unpacking dh-strip-nondeterminism (0.015-1) ... 10:18:46 Selecting previously unselected package debhelper. 10:18:46 Preparing to unpack .../debhelper_9.20160115ubuntu3_all.deb ... 10:18:46 Unpacking debhelper (9.20160115ubuntu3) ... 10:18:47 Selecting previously unselected package libasprintf-dev:amd64. 10:18:47 Preparing to unpack .../libasprintf-dev_0.19.7-2ubuntu3.1_amd64.deb ... 10:18:47 Unpacking libasprintf-dev:amd64 (0.19.7-2ubuntu3.1) ... 10:18:47 Selecting previously unselected package libgettextpo0:amd64. 10:18:47 Preparing to unpack .../libgettextpo0_0.19.7-2ubuntu3.1_amd64.deb ... 10:18:47 Unpacking libgettextpo0:amd64 (0.19.7-2ubuntu3.1) ... 10:18:47 Selecting previously unselected package libgettextpo-dev:amd64. 10:18:47 Preparing to unpack .../libgettextpo-dev_0.19.7-2ubuntu3.1_amd64.deb ... 10:18:47 Unpacking libgettextpo-dev:amd64 (0.19.7-2ubuntu3.1) ... 10:18:47 Selecting previously unselected package libsys-hostname-long-perl. 10:18:47 Preparing to unpack .../libsys-hostname-long-perl_1.5-1_all.deb ... 10:18:47 Unpacking libsys-hostname-long-perl (1.5-1) ... 10:18:47 Selecting previously unselected package libmail-sendmail-perl. 10:18:47 Preparing to unpack .../libmail-sendmail-perl_0.79.16-1_all.deb ... 10:18:47 Unpacking libmail-sendmail-perl (0.79.16-1) ... 10:18:47 Processing triggers for libc-bin (2.23-0ubuntu11) ... 10:18:47 Processing triggers for mime-support (3.59ubuntu1) ... 10:18:47 Setting up libffi6:amd64 (3.2.1-4) ... 10:18:47 Setting up libglib2.0-0:amd64 (2.48.2-0ubuntu4.4) ... 10:18:47 No schema files found: doing nothing. 10:18:48 Setting up groff-base (1.22.3-7) ... 10:18:48 Setting up bsdmainutils (9.0.6ubuntu3) ... 10:18:48 update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode 10:18:48 update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode 10:18:48 Setting up libpipeline1:amd64 (1.4.1-2) ... 10:18:48 Setting up man-db (2.7.5-1) ... 10:18:48 Building database of manual pages ... 10:19:00 Setting up sgml-base (1.26+nmu4ubuntu1) ... 10:19:00 Setting up libunistring0:amd64 (0.9.3-5.2ubuntu1) ... 10:19:00 Setting up libnettle6:amd64 (3.2-1ubuntu0.16.04.1) ... 10:19:00 Setting up libhogweed4:amd64 (3.2-1ubuntu0.16.04.1) ... 10:19:00 Setting up libidn11:amd64 (1.32-3ubuntu1.2) ... 10:19:00 Setting up libp11-kit0:amd64 (0.23.2-5~ubuntu16.04.1) ... 10:19:00 Setting up libtasn1-6:amd64 (4.7-3ubuntu0.16.04.3) ... 10:19:00 Setting up libgnutls30:amd64 (3.4.10-4ubuntu1.5) ... 10:19:00 Setting up openssl (1.0.2g-1ubuntu4.15) ... 10:19:00 Setting up ca-certificates (20170717~16.04.2) ... 10:19:01 Setting up libasprintf0v5:amd64 (0.19.7-2ubuntu3.1) ... 10:19:01 Setting up gettext-base (0.19.7-2ubuntu3.1) ... 10:19:01 Setting up krb5-locales (1.13.2+dfsg-5ubuntu2.1) ... 10:19:01 Setting up libroken18-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:19:01 Setting up libasn1-8-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:19:01 Setting up libkrb5support0:amd64 (1.13.2+dfsg-5ubuntu2.1) ... 10:19:01 Setting up libk5crypto3:amd64 (1.13.2+dfsg-5ubuntu2.1) ... 10:19:01 Setting up libkeyutils1:amd64 (1.5.9-8ubuntu1) ... 10:19:01 Setting up libkrb5-3:amd64 (1.13.2+dfsg-5ubuntu2.1) ... 10:19:01 Setting up libgssapi-krb5-2:amd64 (1.13.2+dfsg-5ubuntu2.1) ... 10:19:01 Setting up libhcrypto4-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:19:01 Setting up libheimbase1-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:19:01 Setting up libwind0-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:19:02 Setting up libhx509-5-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:19:02 Setting up libkrb5-26-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:19:02 Setting up libheimntlm0-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:19:02 Setting up libgssapi3-heimdal:amd64 (1.7~git20150920+dfsg-4ubuntu1.16.04.1) ... 10:19:02 Setting up libsasl2-modules-db:amd64 (2.1.26.dfsg1-14ubuntu0.1) ... 10:19:02 Setting up libsasl2-2:amd64 (2.1.26.dfsg1-14ubuntu0.1) ... 10:19:02 Setting up libldap-2.4-2:amd64 (2.4.42+dfsg-2ubuntu3.7) ... 10:19:02 Setting up librtmp1:amd64 (2.4+20151223.gitfa8646d-1ubuntu0.1) ... 10:19:02 Setting up libcurl3-gnutls:amd64 (7.47.0-1ubuntu2.14) ... 10:19:02 Setting up libglib2.0-data (2.48.2-0ubuntu4.4) ... 10:19:02 Setting up libicu55:amd64 (55.1-7ubuntu0.4) ... 10:19:02 Setting up libsasl2-modules:amd64 (2.1.26.dfsg1-14ubuntu0.1) ... 10:19:02 Setting up libxml2:amd64 (2.9.3+dfsg1-1ubuntu0.6) ... 10:19:02 Setting up shared-mime-info (1.5-2ubuntu0.2) ... 10:19:06 Setting up xdg-user-dirs (0.15-2ubuntu6.16.04.1) ... 10:19:06 Setting up xml-core (0.13+nmu2) ... 10:19:06 Setting up autotools-dev (20150820.1) ... 10:19:06 Setting up curl (7.47.0-1ubuntu2.14) ... 10:19:06 Setting up libcroco3:amd64 (0.6.11-1) ... 10:19:06 Setting up gettext (0.19.7-2ubuntu3.1) ... 10:19:06 Setting up intltool-debian (0.35.0+20060710.4) ... 10:19:06 Setting up po-debconf (1.0.19) ... 10:19:06 Setting up libarchive-zip-perl (1.56-2ubuntu0.1) ... 10:19:06 Setting up libfile-stripnondeterminism-perl (0.015-1) ... 10:19:06 Setting up libtimedate-perl (2.3000-2) ... 10:19:07 Setting up libasprintf-dev:amd64 (0.19.7-2ubuntu3.1) ... 10:19:07 Setting up libgettextpo0:amd64 (0.19.7-2ubuntu3.1) ... 10:19:07 Setting up libgettextpo-dev:amd64 (0.19.7-2ubuntu3.1) ... 10:19:07 Setting up libsys-hostname-long-perl (1.5-1) ... 10:19:07 Setting up libmail-sendmail-perl (0.79.16-1) ... 10:19:07 Setting up dh-strip-nondeterminism (0.015-1) ... 10:19:07 Setting up debhelper (9.20160115ubuntu3) ... 10:19:07 Processing triggers for libc-bin (2.23-0ubuntu11) ... 10:19:07 Processing triggers for ca-certificates (20170717~16.04.2) ... 10:19:07 Updating certificates in /etc/ssl/certs... 10:19:09 148 added, 0 removed; done. 10:19:09 Running hooks in /etc/ca-certificates/update.d... 10:19:09 done. 10:19:09 Processing triggers for sgml-base (1.26+nmu4ubuntu1) ... 10:19:09 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:19:09 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:19:09 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:19:09 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:19:09 Invoking 'apt-get clean' 10:19:15 ---> 100872900b1f 10:19:16 Removing intermediate container 59045b40f7d4 10:19:16 Step 24 : RUN echo "ros-kinetic-catkin: 0.7.18-1xenial-20190607-163525-0800" && python3 -u /tmp/wrapper_scripts/apt.py update-install-clean -q -y -o Debug::pkgProblemResolver=yes ros-kinetic-catkin 10:19:16 ---> Running in f2f1e268b1f9 10:19:16 ros-kinetic-catkin: 0.7.18-1xenial-20190607-163525-0800 10:19:16 Invoking 'apt-get update' 10:19:16 Hit:1 http://10.210.9.154/ubuntu/building xenial InRelease 10:19:16 Hit:2 http://archive.ubuntu.com/ubuntu xenial InRelease 10:19:16 Hit:3 http://archive.ubuntu.com/ubuntu xenial-updates InRelease 10:19:16 Hit:4 http://archive.ubuntu.com/ubuntu xenial-backports InRelease 10:19:16 Hit:5 http://archive.ubuntu.com/ubuntu xenial-security InRelease 10:19:16 Hit:6 http://security.ubuntu.com/ubuntu xenial-security InRelease 10:19:16 Hit:7 http://packages.ros.org/ros/ubuntu xenial InRelease 10:19:19 Reading package lists... 10:19:19 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:19:19 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:19:19 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:19:19 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:19:19 W: http://10.210.9.154/ubuntu/building/dists/xenial/InRelease: Signature by key 0379D44201EF3A91028107A8DCD74318AED39854 uses weak digest algorithm (SHA1) 10:19:19 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:19:19 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:19:19 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:19:19 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:19:19 Invoking 'apt-get install -q -y -o Debug::pkgProblemResolver=yes ros-kinetic-catkin' 10:19:21 Reading package lists... 10:19:21 Building dependency tree... 10:19:21 Reading state information... 10:19:22 Starting pkgProblemResolver with broken count: 0 10:19:22 Starting 2 pkgProblemResolver with broken count: 0 10:19:22 Done 10:19:22 The following additional packages will be installed: 10:19:22 cmake cmake-data docutils-common docutils-doc google-mock libarchive13 10:19:22 libcurl3 libfreetype6 libgtest-dev libjbig0 libjpeg-turbo8 libjpeg8 10:19:22 libjsoncpp1 liblcms2-2 liblzo2-2 libpaper-utils libpaper1 libpng12-0 10:19:22 libpython-stdlib libpython2.7-minimal libpython2.7-stdlib libtiff5 libwebp5 10:19:22 libwebpmux1 python python-catkin-pkg python-catkin-pkg-modules 10:19:22 python-chardet python-dateutil python-docutils python-empy python-minimal 10:19:22 python-nose python-pil python-pkg-resources python-pygments python-pyparsing 10:19:22 python-roman python-six python2.7 python2.7-minimal tzdata ucf 10:19:22 Suggested packages: 10:19:22 codeblocks eclipse ninja-build lrzip liblcms2-utils python-doc python-tk 10:19:22 texlive-latex-recommended texlive-latex-base texlive-lang-french 10:19:22 fonts-linuxlibertine | ttf-linux-libertine python-coverage python-nose-doc 10:19:22 python-pil-doc python-pil-dbg python-setuptools ttf-bitstream-vera 10:19:22 python2.7-doc binfmt-support 10:19:22 The following NEW packages will be installed: 10:19:22 cmake cmake-data docutils-common docutils-doc google-mock libarchive13 10:19:22 libcurl3 libfreetype6 libgtest-dev libjbig0 libjpeg-turbo8 libjpeg8 10:19:22 libjsoncpp1 liblcms2-2 liblzo2-2 libpaper-utils libpaper1 libpng12-0 10:19:22 libpython-stdlib libpython2.7-minimal libpython2.7-stdlib libtiff5 libwebp5 10:19:22 libwebpmux1 python python-catkin-pkg python-catkin-pkg-modules 10:19:22 python-chardet python-dateutil python-docutils python-empy python-minimal 10:19:22 python-nose python-pil python-pkg-resources python-pygments python-pyparsing 10:19:22 python-roman python-six python2.7 python2.7-minimal ros-kinetic-catkin 10:19:22 tzdata ucf 10:19:22 0 upgraded, 44 newly installed, 0 to remove and 4 not upgraded. 10:19:22 Need to get 12.7 MB of archives. 10:19:22 After this operation, 61.2 MB of additional disk space will be used. 10:19:22 Get:1 http://10.210.9.154/ubuntu/building xenial/main amd64 python-six all 1.11.0 [20.6 kB] 10:19:22 Get:2 http://10.210.9.154/ubuntu/building xenial/main amd64 python-catkin-pkg-modules all 0.4.13-1 [41.2 kB] 10:19:22 Get:3 http://10.210.9.154/ubuntu/building xenial/main amd64 python-catkin-pkg all 0.4.13-100 [3,524 B] 10:19:22 Get:4 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 cmake-data all 3.5.1-1ubuntu3 [1,121 kB] 10:19:22 Get:5 http://archive.ubuntu.com/ubuntu xenial/main amd64 liblzo2-2 amd64 2.08-1.2 [48.7 kB] 10:19:22 Get:6 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libarchive13 amd64 3.1.2-11ubuntu0.16.04.6 [262 kB] 10:19:22 Get:7 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libcurl3 amd64 7.47.0-1ubuntu2.14 [186 kB] 10:19:22 Get:8 http://packages.ros.org/ros/ubuntu xenial/main amd64 ros-kinetic-catkin amd64 0.7.18-1xenial-20190607-163525-0800 [124 kB] 10:19:22 Get:9 http://archive.ubuntu.com/ubuntu xenial/main amd64 libjsoncpp1 amd64 1.7.2-1 [73.0 kB] 10:19:22 Get:10 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 cmake amd64 3.5.1-1ubuntu3 [2,623 kB] 10:19:22 Get:11 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libjpeg-turbo8 amd64 1.4.2-0ubuntu3.1 [111 kB] 10:19:23 Get:12 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libpython2.7-minimal amd64 2.7.12-1ubuntu0~16.04.8 [339 kB] 10:19:23 Get:13 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 python2.7-minimal amd64 2.7.12-1ubuntu0~16.04.8 [1,261 kB] 10:19:23 Get:14 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 python-minimal amd64 2.7.12-1~16.04 [28.1 kB] 10:19:23 Get:15 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libpython2.7-stdlib amd64 2.7.12-1ubuntu0~16.04.8 [1,885 kB] 10:19:23 Get:16 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 python2.7 amd64 2.7.12-1ubuntu0~16.04.8 [224 kB] 10:19:23 Get:17 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libpython-stdlib amd64 2.7.12-1~16.04 [7,768 B] 10:19:23 Get:18 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 python amd64 2.7.12-1~16.04 [137 kB] 10:19:23 Get:19 http://archive.ubuntu.com/ubuntu xenial/main amd64 libjbig0 amd64 2.1-3.1 [26.6 kB] 10:19:23 Get:20 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 tzdata all 2019b-0ubuntu0.16.04 [168 kB] 10:19:23 Get:21 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libpng12-0 amd64 1.2.54-1ubuntu1.1 [116 kB] 10:19:23 Get:22 http://archive.ubuntu.com/ubuntu xenial/main amd64 ucf all 3.0036 [52.9 kB] 10:19:23 Get:23 http://archive.ubuntu.com/ubuntu xenial/main amd64 docutils-common all 0.12+dfsg-1 [141 kB] 10:19:23 Get:24 http://archive.ubuntu.com/ubuntu xenial/main amd64 docutils-doc all 0.12+dfsg-1 [889 kB] 10:19:24 Get:25 http://archive.ubuntu.com/ubuntu xenial/universe amd64 libgtest-dev amd64 1.7.0-4ubuntu1 [198 kB] 10:19:24 Get:26 http://archive.ubuntu.com/ubuntu xenial/universe amd64 google-mock amd64 1.7.0-18092013-1 [116 kB] 10:19:24 Get:27 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libfreetype6 amd64 2.6.1-0.1ubuntu2.4 [315 kB] 10:19:24 Get:28 http://archive.ubuntu.com/ubuntu xenial/main amd64 libjpeg8 amd64 8c-2ubuntu8 [2,194 B] 10:19:24 Get:29 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 liblcms2-2 amd64 2.6-3ubuntu2.1 [136 kB] 10:19:24 Get:30 http://archive.ubuntu.com/ubuntu xenial/main amd64 libpaper1 amd64 1.1.24+nmu4ubuntu1 [13.7 kB] 10:19:24 Get:31 http://archive.ubuntu.com/ubuntu xenial/main amd64 libpaper-utils amd64 1.1.24+nmu4ubuntu1 [8,276 B] 10:19:24 Get:32 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libtiff5 amd64 4.0.6-1ubuntu0.6 [149 kB] 10:19:24 Get:33 http://archive.ubuntu.com/ubuntu xenial/main amd64 python-dateutil all 2.4.2-1 [42.5 kB] 10:19:24 Get:34 http://archive.ubuntu.com/ubuntu xenial/main amd64 python-roman all 2.0.0-2 [8,062 B] 10:19:24 Get:35 http://archive.ubuntu.com/ubuntu xenial/main amd64 python-docutils all 0.12+dfsg-1 [348 kB] 10:19:24 Get:36 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 python-pyparsing all 2.0.3+dfsg1-1ubuntu0.1 [35.4 kB] 10:19:24 Get:37 http://archive.ubuntu.com/ubuntu xenial/main amd64 python-pkg-resources all 20.7.0-1 [108 kB] 10:19:24 Get:38 http://archive.ubuntu.com/ubuntu xenial/main amd64 python-chardet all 2.3.0-2 [96.3 kB] 10:19:24 Get:39 http://archive.ubuntu.com/ubuntu xenial/universe amd64 python-empy all 3.3.2-1build1 [72.5 kB] 10:19:24 Get:40 http://archive.ubuntu.com/ubuntu xenial/universe amd64 python-nose all 1.3.7-1 [116 kB] 10:19:24 Get:41 http://archive.ubuntu.com/ubuntu xenial/main amd64 libwebp5 amd64 0.4.4-1 [165 kB] 10:19:24 Get:42 http://archive.ubuntu.com/ubuntu xenial/main amd64 libwebpmux1 amd64 0.4.4-1 [14.2 kB] 10:19:24 Get:43 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 python-pil amd64 3.1.2-0ubuntu1.1 [312 kB] 10:19:24 Get:44 http://archive.ubuntu.com/ubuntu xenial/main amd64 python-pygments all 2.1+dfsg-1 [522 kB] 10:19:25 debconf: delaying package configuration, since apt-utils is not installed 10:19:25 Fetched 12.7 MB in 2s (5,055 kB/s) 10:19:25 Selecting previously unselected package cmake-data. 10:19:25 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 16278 files and directories currently installed.) 10:19:25 Preparing to unpack .../cmake-data_3.5.1-1ubuntu3_all.deb ... 10:19:25 Unpacking cmake-data (3.5.1-1ubuntu3) ... 10:19:27 Selecting previously unselected package liblzo2-2:amd64. 10:19:27 Preparing to unpack .../liblzo2-2_2.08-1.2_amd64.deb ... 10:19:27 Unpacking liblzo2-2:amd64 (2.08-1.2) ... 10:19:27 Selecting previously unselected package libarchive13:amd64. 10:19:27 Preparing to unpack .../libarchive13_3.1.2-11ubuntu0.16.04.6_amd64.deb ... 10:19:27 Unpacking libarchive13:amd64 (3.1.2-11ubuntu0.16.04.6) ... 10:19:27 Selecting previously unselected package libcurl3:amd64. 10:19:27 Preparing to unpack .../libcurl3_7.47.0-1ubuntu2.14_amd64.deb ... 10:19:27 Unpacking libcurl3:amd64 (7.47.0-1ubuntu2.14) ... 10:19:27 Selecting previously unselected package libjsoncpp1:amd64. 10:19:27 Preparing to unpack .../libjsoncpp1_1.7.2-1_amd64.deb ... 10:19:27 Unpacking libjsoncpp1:amd64 (1.7.2-1) ... 10:19:28 Selecting previously unselected package cmake. 10:19:28 Preparing to unpack .../cmake_3.5.1-1ubuntu3_amd64.deb ... 10:19:28 Unpacking cmake (3.5.1-1ubuntu3) ... 10:19:28 Selecting previously unselected package libjpeg-turbo8:amd64. 10:19:28 Preparing to unpack .../libjpeg-turbo8_1.4.2-0ubuntu3.1_amd64.deb ... 10:19:29 Unpacking libjpeg-turbo8:amd64 (1.4.2-0ubuntu3.1) ... 10:19:29 Selecting previously unselected package libpython2.7-minimal:amd64. 10:19:29 Preparing to unpack .../libpython2.7-minimal_2.7.12-1ubuntu0~16.04.8_amd64.deb ... 10:19:29 Unpacking libpython2.7-minimal:amd64 (2.7.12-1ubuntu0~16.04.8) ... 10:19:31 Selecting previously unselected package python2.7-minimal. 10:19:31 Preparing to unpack .../python2.7-minimal_2.7.12-1ubuntu0~16.04.8_amd64.deb ... 10:19:31 Unpacking python2.7-minimal (2.7.12-1ubuntu0~16.04.8) ... 10:19:32 Selecting previously unselected package python-minimal. 10:19:32 Preparing to unpack .../python-minimal_2.7.12-1~16.04_amd64.deb ... 10:19:32 Unpacking python-minimal (2.7.12-1~16.04) ... 10:19:34 Selecting previously unselected package libpython2.7-stdlib:amd64. 10:19:34 Preparing to unpack .../libpython2.7-stdlib_2.7.12-1ubuntu0~16.04.8_amd64.deb ... 10:19:34 Unpacking libpython2.7-stdlib:amd64 (2.7.12-1ubuntu0~16.04.8) ... 10:19:55 Selecting previously unselected package python2.7. 10:19:55 Preparing to unpack .../python2.7_2.7.12-1ubuntu0~16.04.8_amd64.deb ... 10:19:55 Unpacking python2.7 (2.7.12-1ubuntu0~16.04.8) ... 10:19:55 Selecting previously unselected package libpython-stdlib:amd64. 10:19:55 Preparing to unpack .../libpython-stdlib_2.7.12-1~16.04_amd64.deb ... 10:19:55 Unpacking libpython-stdlib:amd64 (2.7.12-1~16.04) ... 10:19:55 Processing triggers for man-db (2.7.5-1) ... 10:19:57 Processing triggers for libc-bin (2.23-0ubuntu11) ... 10:19:57 Processing triggers for mime-support (3.59ubuntu1) ... 10:19:58 Setting up libpython2.7-minimal:amd64 (2.7.12-1ubuntu0~16.04.8) ... 10:19:58 Setting up python2.7-minimal (2.7.12-1ubuntu0~16.04.8) ... 10:19:58 Setting up python-minimal (2.7.12-1~16.04) ... 10:19:59 Selecting previously unselected package python. 10:19:59 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19119 files and directories currently installed.) 10:19:59 Preparing to unpack .../python_2.7.12-1~16.04_amd64.deb ... 10:19:59 Unpacking python (2.7.12-1~16.04) ... 10:20:00 Selecting previously unselected package libjbig0:amd64. 10:20:00 Preparing to unpack .../libjbig0_2.1-3.1_amd64.deb ... 10:20:00 Unpacking libjbig0:amd64 (2.1-3.1) ... 10:20:01 Selecting previously unselected package tzdata. 10:20:01 Preparing to unpack .../tzdata_2019b-0ubuntu0.16.04_all.deb ... 10:20:01 Unpacking tzdata (2019b-0ubuntu0.16.04) ... 10:20:20 Selecting previously unselected package libpng12-0:amd64. 10:20:20 Preparing to unpack .../libpng12-0_1.2.54-1ubuntu1.1_amd64.deb ... 10:20:20 Unpacking libpng12-0:amd64 (1.2.54-1ubuntu1.1) ... 10:20:20 Selecting previously unselected package ucf. 10:20:20 Preparing to unpack .../archives/ucf_3.0036_all.deb ... 10:20:20 Moving old data out of the way 10:20:20 Unpacking ucf (3.0036) ... 10:20:20 Selecting previously unselected package docutils-common. 10:20:20 Preparing to unpack .../docutils-common_0.12+dfsg-1_all.deb ... 10:20:20 Unpacking docutils-common (0.12+dfsg-1) ... 10:20:21 Selecting previously unselected package docutils-doc. 10:20:21 Preparing to unpack .../docutils-doc_0.12+dfsg-1_all.deb ... 10:20:21 Unpacking docutils-doc (0.12+dfsg-1) ... 10:20:21 Selecting previously unselected package libgtest-dev:amd64. 10:20:21 Preparing to unpack .../libgtest-dev_1.7.0-4ubuntu1_amd64.deb ... 10:20:21 Unpacking libgtest-dev:amd64 (1.7.0-4ubuntu1) ... 10:20:21 Selecting previously unselected package google-mock:amd64. 10:20:21 Preparing to unpack .../google-mock_1.7.0-18092013-1_amd64.deb ... 10:20:21 Unpacking google-mock:amd64 (1.7.0-18092013-1) ... 10:20:21 Selecting previously unselected package libfreetype6:amd64. 10:20:21 Preparing to unpack .../libfreetype6_2.6.1-0.1ubuntu2.4_amd64.deb ... 10:20:21 Unpacking libfreetype6:amd64 (2.6.1-0.1ubuntu2.4) ... 10:20:22 Selecting previously unselected package libjpeg8:amd64. 10:20:22 Preparing to unpack .../libjpeg8_8c-2ubuntu8_amd64.deb ... 10:20:22 Unpacking libjpeg8:amd64 (8c-2ubuntu8) ... 10:20:22 Selecting previously unselected package liblcms2-2:amd64. 10:20:22 Preparing to unpack .../liblcms2-2_2.6-3ubuntu2.1_amd64.deb ... 10:20:22 Unpacking liblcms2-2:amd64 (2.6-3ubuntu2.1) ... 10:20:22 Selecting previously unselected package libpaper1:amd64. 10:20:22 Preparing to unpack .../libpaper1_1.1.24+nmu4ubuntu1_amd64.deb ... 10:20:22 Unpacking libpaper1:amd64 (1.1.24+nmu4ubuntu1) ... 10:20:22 Selecting previously unselected package libpaper-utils. 10:20:22 Preparing to unpack .../libpaper-utils_1.1.24+nmu4ubuntu1_amd64.deb ... 10:20:22 Unpacking libpaper-utils (1.1.24+nmu4ubuntu1) ... 10:20:22 Selecting previously unselected package libtiff5:amd64. 10:20:22 Preparing to unpack .../libtiff5_4.0.6-1ubuntu0.6_amd64.deb ... 10:20:22 Unpacking libtiff5:amd64 (4.0.6-1ubuntu0.6) ... 10:20:22 Selecting previously unselected package python-six. 10:20:22 Preparing to unpack .../python-six_1.11.0_all.deb ... 10:20:22 Unpacking python-six (1.11.0) ... 10:20:22 Selecting previously unselected package python-dateutil. 10:20:22 Preparing to unpack .../python-dateutil_2.4.2-1_all.deb ... 10:20:22 Unpacking python-dateutil (2.4.2-1) ... 10:20:22 Selecting previously unselected package python-roman. 10:20:22 Preparing to unpack .../python-roman_2.0.0-2_all.deb ... 10:20:22 Unpacking python-roman (2.0.0-2) ... 10:20:22 Selecting previously unselected package python-docutils. 10:20:22 Preparing to unpack .../python-docutils_0.12+dfsg-1_all.deb ... 10:20:22 Unpacking python-docutils (0.12+dfsg-1) ... 10:20:23 Selecting previously unselected package python-pyparsing. 10:20:23 Preparing to unpack .../python-pyparsing_2.0.3+dfsg1-1ubuntu0.1_all.deb ... 10:20:23 Unpacking python-pyparsing (2.0.3+dfsg1-1ubuntu0.1) ... 10:20:23 Selecting previously unselected package python-catkin-pkg-modules. 10:20:23 Preparing to unpack .../python-catkin-pkg-modules_0.4.13-1_all.deb ... 10:20:23 Unpacking python-catkin-pkg-modules (0.4.13-1) ... 10:20:23 Selecting previously unselected package python-catkin-pkg. 10:20:23 Preparing to unpack .../python-catkin-pkg_0.4.13-100_all.deb ... 10:20:23 Unpacking python-catkin-pkg (0.4.13-100) ... 10:20:23 Selecting previously unselected package python-pkg-resources. 10:20:23 Preparing to unpack .../python-pkg-resources_20.7.0-1_all.deb ... 10:20:23 Unpacking python-pkg-resources (20.7.0-1) ... 10:20:23 Selecting previously unselected package python-chardet. 10:20:23 Preparing to unpack .../python-chardet_2.3.0-2_all.deb ... 10:20:23 Unpacking python-chardet (2.3.0-2) ... 10:20:23 Selecting previously unselected package python-empy. 10:20:23 Preparing to unpack .../python-empy_3.3.2-1build1_all.deb ... 10:20:23 Unpacking python-empy (3.3.2-1build1) ... 10:20:23 Selecting previously unselected package python-nose. 10:20:23 Preparing to unpack .../python-nose_1.3.7-1_all.deb ... 10:20:23 Unpacking python-nose (1.3.7-1) ... 10:20:23 Selecting previously unselected package libwebp5:amd64. 10:20:23 Preparing to unpack .../libwebp5_0.4.4-1_amd64.deb ... 10:20:23 Unpacking libwebp5:amd64 (0.4.4-1) ... 10:20:24 Selecting previously unselected package libwebpmux1:amd64. 10:20:24 Preparing to unpack .../libwebpmux1_0.4.4-1_amd64.deb ... 10:20:24 Unpacking libwebpmux1:amd64 (0.4.4-1) ... 10:20:24 Selecting previously unselected package python-pil:amd64. 10:20:24 Preparing to unpack .../python-pil_3.1.2-0ubuntu1.1_amd64.deb ... 10:20:24 Unpacking python-pil:amd64 (3.1.2-0ubuntu1.1) ... 10:20:24 Selecting previously unselected package python-pygments. 10:20:24 Preparing to unpack .../python-pygments_2.1+dfsg-1_all.deb ... 10:20:24 Unpacking python-pygments (2.1+dfsg-1) ... 10:20:24 Selecting previously unselected package ros-kinetic-catkin. 10:20:24 Preparing to unpack .../ros-kinetic-catkin_0.7.18-1xenial-20190607-163525-0800_amd64.deb ... 10:20:24 Unpacking ros-kinetic-catkin (0.7.18-1xenial-20190607-163525-0800) ... 10:20:24 Processing triggers for man-db (2.7.5-1) ... 10:20:25 Processing triggers for libc-bin (2.23-0ubuntu11) ... 10:20:25 Processing triggers for shared-mime-info (1.5-2ubuntu0.2) ... 10:20:31 Processing triggers for sgml-base (1.26+nmu4ubuntu1) ... 10:20:31 Setting up cmake-data (3.5.1-1ubuntu3) ... 10:20:31 Setting up liblzo2-2:amd64 (2.08-1.2) ... 10:20:32 Setting up libarchive13:amd64 (3.1.2-11ubuntu0.16.04.6) ... 10:20:32 Setting up libcurl3:amd64 (7.47.0-1ubuntu2.14) ... 10:20:32 Setting up libjsoncpp1:amd64 (1.7.2-1) ... 10:20:32 Setting up cmake (3.5.1-1ubuntu3) ... 10:20:32 Setting up libjpeg-turbo8:amd64 (1.4.2-0ubuntu3.1) ... 10:20:32 Setting up libpython2.7-stdlib:amd64 (2.7.12-1ubuntu0~16.04.8) ... 10:20:32 Setting up python2.7 (2.7.12-1ubuntu0~16.04.8) ... 10:20:34 Setting up libpython-stdlib:amd64 (2.7.12-1~16.04) ... 10:20:34 Setting up python (2.7.12-1~16.04) ... 10:20:34 Setting up libjbig0:amd64 (2.1-3.1) ... 10:20:34 Setting up tzdata (2019b-0ubuntu0.16.04) ... 10:20:34 10:20:34 Current default time zone: 'Etc/UTC' 10:20:34 Local time is now: Wed Oct 2 09:20:34 UTC 2019. 10:20:34 Universal Time is now: Wed Oct 2 09:20:34 UTC 2019. 10:20:34 Run 'dpkg-reconfigure tzdata' if you wish to change it. 10:20:34 10:20:35 Setting up libpng12-0:amd64 (1.2.54-1ubuntu1.1) ... 10:20:35 Setting up ucf (3.0036) ... 10:20:35 Setting up docutils-common (0.12+dfsg-1) ... 10:20:35 Setting up docutils-doc (0.12+dfsg-1) ... 10:20:35 Setting up libgtest-dev:amd64 (1.7.0-4ubuntu1) ... 10:20:35 Setting up google-mock:amd64 (1.7.0-18092013-1) ... 10:20:35 Setting up libfreetype6:amd64 (2.6.1-0.1ubuntu2.4) ... 10:20:35 Setting up libjpeg8:amd64 (8c-2ubuntu8) ... 10:20:35 Setting up liblcms2-2:amd64 (2.6-3ubuntu2.1) ... 10:20:35 Setting up libpaper1:amd64 (1.1.24+nmu4ubuntu1) ... 10:20:36 10:20:36 Creating config file /etc/papersize with new version 10:20:36 Setting up libpaper-utils (1.1.24+nmu4ubuntu1) ... 10:20:36 Setting up libtiff5:amd64 (4.0.6-1ubuntu0.6) ... 10:20:36 Setting up python-six (1.11.0) ... 10:20:36 Setting up python-dateutil (2.4.2-1) ... 10:20:37 Setting up python-roman (2.0.0-2) ... 10:20:37 Setting up python-pyparsing (2.0.3+dfsg1-1ubuntu0.1) ... 10:20:38 Setting up python-pkg-resources (20.7.0-1) ... 10:20:39 Setting up python-chardet (2.3.0-2) ... 10:20:39 Setting up python-empy (3.3.2-1build1) ... 10:20:40 Setting up python-nose (1.3.7-1) ... 10:20:41 Setting up libwebp5:amd64 (0.4.4-1) ... 10:20:41 Setting up libwebpmux1:amd64 (0.4.4-1) ... 10:20:41 Setting up python-pil:amd64 (3.1.2-0ubuntu1.1) ... 10:20:42 Setting up python-pygments (2.1+dfsg-1) ... 10:20:43 Processing triggers for sgml-base (1.26+nmu4ubuntu1) ... 10:20:44 Setting up python-docutils (0.12+dfsg-1) ... 10:20:44 update-alternatives: using /usr/share/docutils/scripts/python2/rst-buildhtml to provide /usr/bin/rst-buildhtml (rst-buildhtml) in auto mode 10:20:44 update-alternatives: using /usr/share/docutils/scripts/python2/rst2html to provide /usr/bin/rst2html (rst2html) in auto mode 10:20:44 update-alternatives: using /usr/share/docutils/scripts/python2/rst2latex to provide /usr/bin/rst2latex (rst2latex) in auto mode 10:20:44 update-alternatives: using /usr/share/docutils/scripts/python2/rst2man to provide /usr/bin/rst2man (rst2man) in auto mode 10:20:44 update-alternatives: using /usr/share/docutils/scripts/python2/rst2odt to provide /usr/bin/rst2odt (rst2odt) in auto mode 10:20:44 update-alternatives: using /usr/share/docutils/scripts/python2/rst2odt_prepstyles to provide /usr/bin/rst2odt_prepstyles (rst2odt_prepstyles) in auto mode 10:20:44 update-alternatives: using /usr/share/docutils/scripts/python2/rst2pseudoxml to provide /usr/bin/rst2pseudoxml (rst2pseudoxml) in auto mode 10:20:44 update-alternatives: using /usr/share/docutils/scripts/python2/rst2s5 to provide /usr/bin/rst2s5 (rst2s5) in auto mode 10:20:44 update-alternatives: using /usr/share/docutils/scripts/python2/rst2xetex to provide /usr/bin/rst2xetex (rst2xetex) in auto mode 10:20:44 update-alternatives: using /usr/share/docutils/scripts/python2/rst2xml to provide /usr/bin/rst2xml (rst2xml) in auto mode 10:20:44 update-alternatives: using /usr/share/docutils/scripts/python2/rstpep2html to provide /usr/bin/rstpep2html (rstpep2html) in auto mode 10:20:45 Setting up python-catkin-pkg-modules (0.4.13-1) ... 10:20:46 Setting up python-catkin-pkg (0.4.13-100) ... 10:20:46 Setting up ros-kinetic-catkin (0.7.18-1xenial-20190607-163525-0800) ... 10:20:46 Processing triggers for libc-bin (2.23-0ubuntu11) ... 10:20:46 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:20:46 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:20:46 W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:20:46 W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:20:46 Invoking 'apt-get clean' 10:20:54 ---> 0fb06d2f3ae2 10:20:55 Removing intermediate container f2f1e268b1f9 10:20:55 Step 25 : USER buildfarm 10:20:55 ---> Running in 7b7f018e9598 10:20:59 ---> 8ea5ad6b3009 10:20:59 Removing intermediate container 7b7f018e9598 10:20:59 Step 26 : ENTRYPOINT sh -c 10:20:59 ---> Running in 6cc19c764aa7 10:21:00 ---> dabc164eec21 10:21:00 Error removing intermediate container 6cc19c764aa7: rmdriverfs: Driver aufs failed to remove root filesystem 6cc19c764aa79c73caab767ffdd5ed4f707c934d7a405a6c85e571fff02e5450: rename /var/lib/docker/aufs/mnt/6cc19c764aa79c73caab767ffdd5ed4f707c934d7a405a6c85e571fff02e5450 /var/lib/docker/aufs/mnt/6cc19c764aa79c73caab767ffdd5ed4f707c934d7a405a6c85e571fff02e5450-removing: device or resource busy 10:21:00 Step 27 : CMD PYTHONPATH=/tmp/ros_buildfarm:$PYTHONPATH PATH=/usr/lib/ccache:$PATH python3 -u /tmp/ros_buildfarm/scripts/release/build_binarydeb.py kinetic pedsim_scenarios --sourcedeb-dir /tmp/binarydeb 10:21:00 ---> Running in 99f2c91a6064 10:21:00 ---> 04a71217bf8a 10:21:00 Error removing intermediate container 6cc19c764aa7: nosuchcontainer: no such id: 6cc19c764aa79c73caab767ffdd5ed4f707c934d7a405a6c85e571fff02e5450 10:21:00 Successfully built 04a71217bf8a 10:21:00 + echo # END SECTION 10:21:00 # END SECTION
10:21:00 + echo # BEGIN SECTION: Run Dockerfile - build binarydeb
3. Run Dockerfile - build binarydeb

Hide Details

10:21:00 # BEGIN SECTION: Run Dockerfile - build binarydeb 10:21:00 + docker run --rm --cidfile=/home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/docker_build_binarydeb/docker.cid -e=HOME= -e=TRAVIS= --net=host -v /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/ros_buildfarm:/tmp/ros_buildfarm:ro -v /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/binarydeb:/tmp/binarydeb -v /home/jenkins-slave/.ccache:/home/buildfarm/.ccache binarydeb_build.kinetic_ubuntu_xenial_amd64_pedsim_scenarios
3.1. build binarydeb

Hide Details

10:21:00 # BEGIN SUBSECTION: build binarydeb 10:21:01 Package 'ros-kinetic-pedsim-scenarios' version: 1.0.0-1xenial-20191002-091624+0000 10:21:01 Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:21:01 Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:21:01 Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:21:01 Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:21:03 Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:21:03 Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:21:03 Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:21:03 Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:21:03 Invoking 'apt-src build ros-kinetic-pedsim-scenarios' in '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:21:03 Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:21:03 Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:21:03 Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:21:03 Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:21:04 Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:21:04 Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:24 and /etc/apt/sources.list:50 10:21:04 Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:21:04 Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:26 and /etc/apt/sources.list:52 10:21:04 I: Building in /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0 .. 10:21:04 dpkg-buildpackage: source package ros-kinetic-pedsim-scenarios 10:21:04 dpkg-buildpackage: source version 1.0.0-1xenial-20191002-091624+0000 10:21:04 dpkg-buildpackage: source distribution xenial 10:21:04 dpkg-buildpackage: source changed by Chittaranjan Swaminathan <chitt@aass.oru.se> 10:21:05 dpkg-source --before-build ros-kinetic-pedsim-scenarios-1.0.0 10:21:05 dpkg-buildpackage: host architecture amd64 10:21:05 dpkg-source: info: using options from ros-kinetic-pedsim-scenarios-1.0.0/debian/source/options: --auto-commit 10:21:05 fakeroot debian/rules clean 10:21:05 dh clean -v --buildsystem=cmake 10:21:06 dh_testdir -O-v -O--buildsystem=cmake 10:21:06 dh_auto_clean -O-v -O--buildsystem=cmake 10:21:06 dh_clean -O-v -O--buildsystem=cmake 10:21:06 rm -f debian/debhelper-build-stamp 10:21:06 rm -f debian/ros-kinetic-pedsim-scenarios.substvars 10:21:06 rm -f debian/ros-kinetic-pedsim-scenarios.*.debhelper 10:21:06 rm -rf debian/ros-kinetic-pedsim-scenarios/ 10:21:06 rm -rf debian/.debhelper/ 10:21:06 rm -f debian/*.debhelper.log 10:21:06 rm -f debian/files 10:21:06 find . \( \( \ 10:21:06 \( -path .\*/.git -o -path .\*/.svn -o -path .\*/.bzr -o -path .\*/.hg -o -path .\*/CVS \) -prune -o -type f -a \ 10:21:06 \( -name '#*#' -o -name '.*~' -o -name '*~' -o -name DEADJOE \ 10:21:06 -o -name '*.orig' -o -name '*.rej' -o -name '*.bak' \ 10:21:06 -o -name '.*.orig' -o -name .*.rej -o -name '.SUMS' \ 10:21:06 -o -name TAGS -o \( -path '*/.deps/*' -a -name '*.P' \) \ 10:21:06 \) -exec rm -f {} + \) -o \ 10:21:06 \( -type d -a -name autom4te.cache -prune -exec rm -rf {} + \) \) 10:21:06 rm -f *-stamp 10:21:06 debian/rules build 10:21:06 dh build -v --buildsystem=cmake 10:21:06 dh_testdir -O-v -O--buildsystem=cmake 10:21:06 dh_update_autotools_config -O-v -O--buildsystem=cmake 10:21:06 debian/rules override_dh_auto_configure 10:21:06 make[1]: Entering directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:21:06 # In case we're installing to a non-standard location, look for a setup.sh 10:21:06 # in the install tree that was dropped by catkin, and source it. It will 10:21:06 # set things like CMAKE_PREFIX_PATH, PKG_CONFIG_PATH, and PYTHONPATH. 10:21:06 if [ -f "/opt/ros/kinetic/setup.sh" ]; then . "/opt/ros/kinetic/setup.sh"; fi && \ 10:21:06 dh_auto_configure -- \ 10:21:06 -DCATKIN_BUILD_BINARY_PACKAGE="1" \ 10:21:06 -DCMAKE_INSTALL_PREFIX="/opt/ros/kinetic" \ 10:21:06 -DCMAKE_PREFIX_PATH="/opt/ros/kinetic" 10:21:06 mkdir -p obj-x86_64-linux-gnu 10:21:06 cd obj-x86_64-linux-gnu 10:21:06 cmake .. -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_BUILD_TYPE=None -DCMAKE_INSTALL_SYSCONFDIR=/etc -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DCATKIN_BUILD_BINARY_PACKAGE=1 -DCMAKE_INSTALL_PREFIX=/opt/ros/kinetic -DCMAKE_PREFIX_PATH=/opt/ros/kinetic 10:21:06 -- The C compiler identification is GNU 5.4.0 10:21:07 -- The CXX compiler identification is GNU 5.4.0 10:21:07 -- Check for working C compiler: /usr/lib/ccache/x86_64-linux-gnu-gcc 10:21:07 -- Check for working C compiler: /usr/lib/ccache/x86_64-linux-gnu-gcc -- works 10:21:07 -- Detecting C compiler ABI info 10:21:07 -- Detecting C compiler ABI info - done 10:21:07 -- Detecting C compile features 10:21:08 -- Detecting C compile features - done 10:21:08 -- Check for working CXX compiler: /usr/lib/ccache/x86_64-linux-gnu-g++ 10:21:08 -- Check for working CXX compiler: /usr/lib/ccache/x86_64-linux-gnu-g++ -- works 10:21:08 -- Detecting CXX compiler ABI info 10:21:08 -- Detecting CXX compiler ABI info - done 10:21:08 -- Detecting CXX compile features 10:21:09 -- Detecting CXX compile features - done 10:21:09 -- Using CATKIN_DEVEL_PREFIX: /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu/devel 10:21:09 -- Using CMAKE_PREFIX_PATH: /opt/ros/kinetic 10:21:09 -- This workspace overlays: /opt/ros/kinetic 10:21:09 -- Found PythonInterp: /usr/bin/python (found version "2.7.12") 10:21:09 -- Using PYTHON_EXECUTABLE: /usr/bin/python 10:21:09 -- Using Debian Python package layout 10:21:09 -- Using empy: /usr/bin/empy 10:21:09 -- Using CATKIN_ENABLE_TESTING: ON 10:21:09 -- Skip enable_testing() when building binary package 10:21:09 -- Using CATKIN_TEST_RESULTS_DIR: /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu/test_results 10:21:09 -- Found gmock sources under '/usr/src/gmock': gmock will be built 10:21:09 -- Looking for pthread.h 10:21:10 -- Looking for pthread.h - found 10:21:10 -- Looking for pthread_create 10:21:10 -- Looking for pthread_create - not found 10:21:10 -- Looking for pthread_create in pthreads 10:21:10 -- Looking for pthread_create in pthreads - not found 10:21:10 -- Looking for pthread_create in pthread 10:21:10 -- Looking for pthread_create in pthread - found 10:21:10 -- Found Threads: TRUE 10:21:10 -- Found gtest sources under '/usr/src/gmock': gtests will be built 10:21:10 -- Using Python nosetests: /usr/bin/nosetests-2.7 10:21:10 -- catkin 0.7.18 10:21:10 -- BUILD_SHARED_LIBS is on 10:21:11 -- Configuring done 10:21:11 -- Generating done 10:21:11 CMake Warning: 10:21:11 Manually-specified variables were not used by the project: 10:21:11 10:21:11 CMAKE_INSTALL_LOCALSTATEDIR 10:21:11 CMAKE_INSTALL_SYSCONFDIR 10:21:11 10:21:11 10:21:11 -- Build files have been written to: /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu 10:21:11 cd /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0 10:21:11 make[1]: Leaving directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:21:11 debian/rules override_dh_auto_build 10:21:11 make[1]: Entering directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:21:11 # In case we're installing to a non-standard location, look for a setup.sh 10:21:11 # in the install tree that was dropped by catkin, and source it. It will 10:21:11 # set things like CMAKE_PREFIX_PATH, PKG_CONFIG_PATH, and PYTHONPATH. 10:21:11 if [ -f "/opt/ros/kinetic/setup.sh" ]; then . "/opt/ros/kinetic/setup.sh"; fi && \ 10:21:11 dh_auto_build 10:21:12 cd obj-x86_64-linux-gnu 10:21:12 make -j1 10:21:12 make[2]: Entering directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu' 10:21:12 /usr/bin/cmake -H/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0 -B/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu --check-build-system CMakeFiles/Makefile.cmake 0 10:21:12 /usr/bin/cmake -E cmake_progress_start /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu/CMakeFiles /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu/CMakeFiles/progress.marks 10:21:12 make -f CMakeFiles/Makefile2 all 10:21:12 make[3]: Entering directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu' 10:21:12 make[3]: Nothing to be done for 'all'. 10:21:12 make[3]: Leaving directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu' 10:21:12 /usr/bin/cmake -E cmake_progress_start /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu/CMakeFiles 0 10:21:12 make[2]: Leaving directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu' 10:21:12 cd /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0 10:21:12 make[1]: Leaving directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:21:12 debian/rules override_dh_auto_test 10:21:12 make[1]: Entering directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:21:12 # In case we're installing to a non-standard location, look for a setup.sh 10:21:12 # in the install tree that was dropped by catkin, and source it. It will 10:21:12 # set things like CMAKE_PREFIX_PATH, PKG_CONFIG_PATH, and PYTHONPATH. 10:21:12 echo -- Running tests. Even if one of them fails the build is not canceled. 10:21:12 -- Running tests. Even if one of them fails the build is not canceled. 10:21:12 if [ -f "/opt/ros/kinetic/setup.sh" ]; then . "/opt/ros/kinetic/setup.sh"; fi && \ 10:21:12 dh_auto_test || true 10:21:12 make[1]: Leaving directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:21:12 fakeroot debian/rules binary 10:21:12 dh binary -v --buildsystem=cmake 10:21:12 dh_testroot -O-v -O--buildsystem=cmake 10:21:12 dh_prep -O-v -O--buildsystem=cmake 10:21:12 rm -f debian/ros-kinetic-pedsim-scenarios.substvars 10:21:12 rm -f debian/ros-kinetic-pedsim-scenarios.*.debhelper 10:21:12 rm -rf debian/ros-kinetic-pedsim-scenarios/ 10:21:12 dh_installdirs -O-v -O--buildsystem=cmake 10:21:12 install -d debian/ros-kinetic-pedsim-scenarios 10:21:12 debian/rules override_dh_auto_install 10:21:12 make[1]: Entering directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:21:12 # In case we're installing to a non-standard location, look for a setup.sh 10:21:12 # in the install tree that was dropped by catkin, and source it. It will 10:21:12 # set things like CMAKE_PREFIX_PATH, PKG_CONFIG_PATH, and PYTHONPATH. 10:21:12 if [ -f "/opt/ros/kinetic/setup.sh" ]; then . "/opt/ros/kinetic/setup.sh"; fi && \ 10:21:12 dh_auto_install 10:21:13 cd obj-x86_64-linux-gnu 10:21:13 make -j1 install DESTDIR=/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/debian/ros-kinetic-pedsim-scenarios AM_UPDATE_INFO_DIR=no 10:21:13 make[2]: Entering directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu' 10:21:13 /usr/bin/cmake -H/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0 -B/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu --check-build-system CMakeFiles/Makefile.cmake 0 10:21:13 /usr/bin/cmake -E cmake_progress_start /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu/CMakeFiles /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu/CMakeFiles/progress.marks 10:21:13 make -f CMakeFiles/Makefile2 all 10:21:13 make[3]: Entering directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu' 10:21:13 make[3]: Nothing to be done for 'all'. 10:21:13 make[3]: Leaving directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu' 10:21:13 /usr/bin/cmake -E cmake_progress_start /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu/CMakeFiles 0 10:21:13 make -f CMakeFiles/Makefile2 preinstall 10:21:13 make[3]: Entering directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu' 10:21:13 make[3]: Nothing to be done for 'preinstall'. 10:21:13 make[3]: Leaving directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu' 10:21:13 Install the project... 10:21:13 /usr/bin/cmake -P cmake_install.cmake 10:21:13 -- Install configuration: "None" 10:21:13 -- Installing: /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/debian/ros-kinetic-pedsim-scenarios/opt/ros/kinetic/lib/pkgconfig/pedsim_scenarios.pc 10:21:13 -- Installing: /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/debian/ros-kinetic-pedsim-scenarios/opt/ros/kinetic/share/pedsim_scenarios/cmake/pedsim_scenariosConfig.cmake 10:21:13 -- Installing: /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/debian/ros-kinetic-pedsim-scenarios/opt/ros/kinetic/share/pedsim_scenarios/cmake/pedsim_scenariosConfig-version.cmake 10:21:13 -- Installing: /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/debian/ros-kinetic-pedsim-scenarios/opt/ros/kinetic/share/pedsim_scenarios/package.xml 10:21:13 -- Installing: /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/debian/ros-kinetic-pedsim-scenarios/opt/ros/kinetic/share/pedsim_scenarios/launch 10:21:13 -- Installing: /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/debian/ros-kinetic-pedsim-scenarios/opt/ros/kinetic/share/pedsim_scenarios/launch/office.launch 10:21:13 -- Installing: /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/debian/ros-kinetic-pedsim-scenarios/opt/ros/kinetic/share/pedsim_scenarios/scenes 10:21:13 -- Installing: /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/debian/ros-kinetic-pedsim-scenarios/opt/ros/kinetic/share/pedsim_scenarios/scenes/office.xml 10:21:13 make[2]: Leaving directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu' 10:21:13 cd /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0 10:21:13 make[1]: Leaving directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:21:13 dh_install -O-v -O--buildsystem=cmake 10:21:13 dh_installdocs -O-v -O--buildsystem=cmake 10:21:13 install -d debian/ros-kinetic-pedsim-scenarios/usr/share/doc/ros-kinetic-pedsim-scenarios 10:21:13 dh_installchangelogs -O-v -O--buildsystem=cmake 10:21:13 install -p -m0644 debian/changelog debian/ros-kinetic-pedsim-scenarios/usr/share/doc/ros-kinetic-pedsim-scenarios/changelog.Debian 10:21:13 dh_installexamples -O-v -O--buildsystem=cmake 10:21:13 dh_installman -O-v -O--buildsystem=cmake 10:21:13 dh_installcatalogs -O-v -O--buildsystem=cmake 10:21:13 dh_installcron -O-v -O--buildsystem=cmake 10:21:13 dh_installdebconf -O-v -O--buildsystem=cmake 10:21:13 install -d debian/ros-kinetic-pedsim-scenarios/DEBIAN 10:21:13 dh_installemacsen -O-v -O--buildsystem=cmake 10:21:13 dh_installifupdown -O-v -O--buildsystem=cmake 10:21:13 dh_installinfo -O-v -O--buildsystem=cmake 10:21:13 dh_installinit -O-v -O--buildsystem=cmake 10:21:14 dh_installmenu -O-v -O--buildsystem=cmake 10:21:14 dh_installmime -O-v -O--buildsystem=cmake 10:21:14 dh_installmodules -O-v -O--buildsystem=cmake 10:21:14 dh_installlogcheck -O-v -O--buildsystem=cmake 10:21:14 dh_installlogrotate -O-v -O--buildsystem=cmake 10:21:14 dh_installpam -O-v -O--buildsystem=cmake 10:21:14 dh_installppp -O-v -O--buildsystem=cmake 10:21:14 dh_installudev -O-v -O--buildsystem=cmake 10:21:14 dh_installgsettings -O-v -O--buildsystem=cmake 10:21:14 dh_bugfiles -O-v -O--buildsystem=cmake 10:21:14 dh_ucf -O-v -O--buildsystem=cmake 10:21:14 dh_lintian -O-v -O--buildsystem=cmake 10:21:14 dh_gconf -O-v -O--buildsystem=cmake 10:21:14 dh_icons -O-v -O--buildsystem=cmake 10:21:14 dh_perl -O-v -O--buildsystem=cmake 10:21:14 dh_usrlocal -O-v -O--buildsystem=cmake 10:21:14 dh_link -O-v -O--buildsystem=cmake 10:21:14 dh_installwm -O-v -O--buildsystem=cmake 10:21:14 dh_installxfonts -O-v -O--buildsystem=cmake 10:21:15 dh_strip_nondeterminism -O-v -O--buildsystem=cmake 10:21:15 dh_compress -O-v -O--buildsystem=cmake 10:21:15 cd debian/ros-kinetic-pedsim-scenarios 10:21:15 chmod a-x usr/share/doc/ros-kinetic-pedsim-scenarios/changelog.Debian 10:21:15 gzip -9nf usr/share/doc/ros-kinetic-pedsim-scenarios/changelog.Debian 10:21:15 cd '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:21:15 dh_fixperms -O-v -O--buildsystem=cmake 10:21:15 find debian/ros-kinetic-pedsim-scenarios -print0 2>/dev/null | xargs -0r chown --no-dereference 0:0 10:21:15 find debian/ros-kinetic-pedsim-scenarios ! -type l -print0 2>/dev/null | xargs -0r chmod go=rX,u+rw,a-s 10:21:15 find debian/ros-kinetic-pedsim-scenarios/usr/share/doc -type f ! -regex 'debian/ros-kinetic-pedsim-scenarios/usr/share/doc/[^/]*/examples/.*' -print0 2>/dev/null | xargs -0r chmod 0644 10:21:15 find debian/ros-kinetic-pedsim-scenarios/usr/share/doc -type d -print0 2>/dev/null | xargs -0r chmod 0755 10:21:15 find debian/ros-kinetic-pedsim-scenarios/usr/share/man debian/ros-kinetic-pedsim-scenarios/usr/man/ debian/ros-kinetic-pedsim-scenarios/usr/X11*/man/ -type f -print0 2>/dev/null | xargs -0r chmod 0644 10:21:15 find debian/ros-kinetic-pedsim-scenarios/usr/include -type f -print0 2>/dev/null | xargs -0r chmod 0644 10:21:15 find debian/ros-kinetic-pedsim-scenarios/usr/share/applications -type f -print0 2>/dev/null | xargs -0r chmod 0644 10:21:15 find debian/ros-kinetic-pedsim-scenarios/usr/lib/x86_64-linux-gnu/perl5/5.22 debian/ros-kinetic-pedsim-scenarios/usr/share/perl5 -type f -perm -5 -name '*.pm' -print0 2>/dev/null | xargs -0r chmod a-X 10:21:15 find debian/ros-kinetic-pedsim-scenarios -perm -5 -type f \( -name '*.so.*' -o -name '*.so' -o -name '*.la' -o -name '*.a' -o -name '*.js' -o -name '*.css' -o -name '*.jpeg' -o -name '*.jpg' -o -name '*.png' -o -name '*.gif' -o -name '*.cmxs' \) -print0 2>/dev/null | xargs -0r chmod 0644 10:21:15 find debian/ros-kinetic-pedsim-scenarios/usr/lib -type f -name '*.ali' -print0 2>/dev/null | xargs -0r chmod uga-w 10:21:15 dh_strip -O-v -O--buildsystem=cmake 10:21:15 dh_makeshlibs -O-v -O--buildsystem=cmake 10:21:15 rm -f debian/ros-kinetic-pedsim-scenarios/DEBIAN/shlibs 10:21:15 debian/rules override_dh_shlibdeps 10:21:15 make[1]: Entering directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:21:15 # In case we're installing to a non-standard location, look for a setup.sh 10:21:15 # in the install tree that was dropped by catkin, and source it. It will 10:21:15 # set things like CMAKE_PREFIX_PATH, PKG_CONFIG_PATH, and PYTHONPATH. 10:21:15 if [ -f "/opt/ros/kinetic/setup.sh" ]; then . "/opt/ros/kinetic/setup.sh"; fi && \ 10:21:15 dh_shlibdeps -l/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/debian/ros-kinetic-pedsim-scenarios//opt/ros/kinetic/lib/ 10:21:15 make[1]: Leaving directory '/tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0' 10:21:15 dh_installdeb -O-v -O--buildsystem=cmake 10:21:15 dh_gencontrol -O-v -O--buildsystem=cmake 10:21:15 echo misc:Depends= >> debian/ros-kinetic-pedsim-scenarios.substvars 10:21:15 echo misc:Pre-Depends= >> debian/ros-kinetic-pedsim-scenarios.substvars 10:21:15 dpkg-gencontrol -pros-kinetic-pedsim-scenarios -ldebian/changelog -Tdebian/ros-kinetic-pedsim-scenarios.substvars -Pdebian/ros-kinetic-pedsim-scenarios 10:21:15 dpkg-gencontrol: warning: Depends field of package ros-kinetic-pedsim-scenarios: unknown substitution variable ${shlibs:Depends} 10:21:15 chmod 0644 debian/ros-kinetic-pedsim-scenarios/DEBIAN/control 10:21:15 chown 0:0 debian/ros-kinetic-pedsim-scenarios/DEBIAN/control 10:21:15 dh_md5sums -O-v -O--buildsystem=cmake 10:21:16 (cd debian/ros-kinetic-pedsim-scenarios >/dev/null ; find . -type f ! -regex './DEBIAN/.*' -printf '%P\0' | LC_ALL=C sort -z | xargs -r0 md5sum > DEBIAN/md5sums) >/dev/null 10:21:16 chmod 0644 debian/ros-kinetic-pedsim-scenarios/DEBIAN/md5sums 10:21:16 chown 0:0 debian/ros-kinetic-pedsim-scenarios/DEBIAN/md5sums 10:21:16 dh_builddeb -O-v -O--buildsystem=cmake 10:21:16 dpkg-deb --build debian/ros-kinetic-pedsim-scenarios .. 10:21:16 dpkg-deb: building package 'ros-kinetic-pedsim-scenarios' in '../ros-kinetic-pedsim-scenarios_1.0.0-1xenial-20191002-091624+0000_amd64.deb'. 10:21:16 dpkg-genchanges -b >../ros-kinetic-pedsim-scenarios_1.0.0-1xenial-20191002-091624+0000_amd64.changes 10:21:16 dpkg-genchanges: binary-only upload (no source code included) 10:21:16 dpkg-source --after-build ros-kinetic-pedsim-scenarios-1.0.0 10:21:16 dpkg-source: info: using options from ros-kinetic-pedsim-scenarios-1.0.0/debian/source/options: --auto-commit 10:21:16 dpkg-buildpackage: binary-only upload (no source included) 10:21:16 I: Successfully built in /tmp/binarydeb/ros-kinetic-pedsim-scenarios-1.0.0 10:21:16 # END SUBSECTION
10:21:17 + echo # END SECTION 10:21:17 # END SECTION
10:21:17 [Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary] $ /bin/sh -xe /tmp/hudson2469574260349014407.sh 10:21:17 + [ false = false ] 10:21:17 + echo # BEGIN SECTION: Clean up to save disk space on slaves
4. Clean up to save disk space on slaves

Hide Details

10:21:17 # BEGIN SECTION: Clean up to save disk space on slaves 10:21:17 + chmod -R u+w /home/jenkins-slave/workspace/Kbin_uX64__pedsim_scenarios__ubuntu_xenial_amd64__binary/binarydeb 10:21:17 + rm -fr binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/CHANGELOG.rst binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/CMakeLists.txt binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/debian binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/launch binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/obj-x86_64-linux-gnu binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/package.xml binarydeb/ros-kinetic-pedsim-scenarios-1.0.0/scenes 10:21:17 + echo # END SECTION 10:21:17 # END SECTION
10:21:17 SSH: Connecting from host [lcas-buildfarm-slave-1] 10:21:17 SSH: Connecting with configuration [repo] ... 10:21:18 SSH: Disconnecting configuration [repo] ... 10:21:18 SSH: Transferred 2 file(s) 10:21:18 Build step 'Send files or execute commands over SSH' changed build result to SUCCESS 10:21:18 Waiting for the completion of Krel_import-package 10:21:21 Krel_import-package #4969 completed. Result was SUCCESS 10:21:21 $ ssh-agent -k 10:21:21 unset SSH_AUTH_SOCK; 10:21:21 unset SSH_AGENT_PID; 10:21:21 echo Agent pid 26423 killed; 10:21:21 [ssh-agent] Stopped. 10:21:21 [description-setter] Description set: 1.0.0-1xenial-20191002-091624+0000 10:21:21 Warning: you have no plugins providing access control for builds, so falling back to legacy behavior of permitting any downstream builds to be triggered 10:21:21 Triggering a new build of Krel_sync-packages-to-testing_xenial_amd64 10:21:21 Finished: SUCCESS